Customers compare Y02483 to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The correct SumoSprings Solo Custom Helper Springs for a motorhome with Ford E-450 Chassis is part #SSF-106-47. These will be a direct bolt-on swap with improvements to both ride quality and sway control. If you decide to replace the rears as well…
view full answer...Good news! I was able to go out to the warehouse and measure the pin that is included in the Replacement Hitch Bolt kit #Y8780022 and found that when placed in the lock you will have 3.66 inches of pin length between the lock and the head of the…
view full answer...The distance from the hitch pin hole of the Saris Swing Away Hitch Extender part #SAR36VR to the other hitch pin hole is 13-1/2 inches.
view full answer...The Kuat Pivot, part #PVP20B is usable on the rear of a cargo van like a 2016 Mercedes-Benz Sprinter.
view full answer...I reached out to a representative of Yakima who said that the Yakima BackSwing Swing Away Hitch Extender #Y02483 had a receiver that had a depth of 8 inches and was 2-1/2 inches from the edge of the receiver to the center of the hitch pin hole. The…
view full answer...We currently offer replacement end caps for two different brands of roof mounted tracks, Yakima part #Y8810103 and Thule part #853-5361. The tracks can be hard to identify and I do know that Thule did produce these for A.R.E. Camper Shells so if the…
view full answer...The weight capacity of the Yakima CoreBar Crossbars like part #Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part #Y01157 which have a 500 lb…
view full answer...We have one motorcycle carrier that is rated for use at the rear of an RV. For that you would want the Ultra-Fab Motorcycle Carrier, #UF48-979033. We were informed by Ultra-Fab that it is okay to use this carrier on a motorhome or trailer. This has a…
view full answer...The Swagman Quad 2+2 S64692 has a measurement of 17-1/4 inches from the center of the hitch pin hole to the closest wheel tray. The shank raises at the 10 inch point. To get your swing away, I recommend the Yakima BackSwing #Y02483 which is 14-1/2…
view full answer...The Kuat Piston Pro X Bike Rack #KU98VR is my favorite bike rack for styling and simplicity of use. Best of all it can be used with your Gazelle C380 e-bike even with you having the rear fender that nearly covers the entire rear tire. The Fender…
view full answer...The total width is 56-1/2 inches, and I have added a couple of diagrams for you showing the overall dimensions of the Destination Ebike rack you asked about, which is the following part number: - Hollywood Racks Destination E Bike Rack for 2 Electric…
view full answer...Thanks for the pictures! The best bike rack for your Gazelle Step-Thru E-Bikes is going to be the Yakima OnRamp Bike Rack item #Y36FR. Neither one of the bike racks you referenced will work with fenders or be capable of handling the weight. The…
view full answer...