Stromberg Carlson Trailer Jack LG-BRACKETS Review Video

Hey Ronald, the landing gear part #RVLG-8HDL does not come with new brackets but we have them available with the part #LG-Brackets. These will need to be welded on as there isn't a way to bolt on the jacks to the brackets you have now.

The only difference between a 4 leaf spring and a 5 leaf spring like the #e34SR is that the 4 leaf spring will use slightly thicker leaves and is 1/8 of an inch shorter. To get the best measurement of your existing springs, measure the center eye to…

I checked with Lippert Components and the Lippert Electric Landing Gear Set #LC333964 and the bolt that comes with the bracket needs to be torqued to 10-18 ft-lbs. You do need to be careful not to get it too tight because you could actually bend the…

Trailer landing gear sets like the etrailer.com #RVLG-8HDL that you referenced are designed to bolt onto brackets that are welded to the frame. In terms of function or capacity there is no particular reason you couldn't just weld the legs…

Yes the etrailer Landing Gear Set - 36-1/2" Lift - 8,000 lbs part #RVLG-8000 can be used in the both the older exposed gear applications as well as the newer internal type of applications. I've included the video Jon did on the landing gear…

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

Ram Landing Gear 12-Volt Motor Kit #LC142178 is rated for use with landing gear having up to an 8000-lb rating, such as set #RVLG-8000. Atwood's discontinued landing gear kit 75721 was rated for 5500-lbs so the new motor will have an easier time…

The Lippert landing gear bracket #LC113511 is 2" long x 3-1/2" wide x 4-1/2" tall just like #LG-Brackets. The top portion of the bracket has a slightly different bend to it, but for all intents and purposes these are basically the same…

Yes, you can use Replacement Follow Leg for Stromberg Carlson Landing Gear #LG-177201 with your Venture landing gear system. This same leg design is used by many manufacturers so it is interchangeable with them.

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

Landing gear legs do typically have weld stop brackets to hold the legs securely to the welded brackets on your trailer frame. The landing gear will have a maximum capacity lift, which for the Replacement Follow Leg for Stromberg Carlson Landing Gear…

Your question came in totally blank, all I got were a couple pictures of a drop spindle axle on top of a leaf spring with the U-bolts removed. If you are having difficulty separating the leaf spring from the axle you might try some penetrating lube…