Optronics Trailer Lights - Tail Lights - RVSTLB61 Review Video

I may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs. The Low Profile LED RV Tail Light #RVSTLB61 for the driver's side and #RVSTLB60 for the passenger's side might work for…

If I can see a picture of the porch light and base I might be able to identify it. Otherwise I don't have a way to look it up by the trailer info you listed.

The Replacement Lens for RVPL5A and RVPL7A Lights #APL5AB is meant to be an exact replacement for the Optronics porch lights #RVPL5A and #RVPL7A as the title suggests. Although I cannot confirm if it would fit on the part number that you referenced,…

The Stromberg Carlson RV Folding Handrail part #AC-544 would be what you'd want to give you a hand rail that extends further down and would be much easier to grab. It would basically be a much larger version of what you have now and would be…

The easiest way to determine if you have a first or second generation MORryde Stepabove 3-step setup is to look at the way the step legs lock and adjust. If they have a removable pin you have a first generation and need the part #MR93RR. If instead…

The license plate light on the bottom of the LED Trailer Tail Light with License Plate Bracket #328-003-81LBM1 that you referenced is clear incandescent bulb.

Based on images I could find of the tail lights used on the 2018 Keystone Avalanche 5th wheel we have the Drivers Side #328-003-81LBM1 and Passenger Side #328-003-81BM1 tail lights you can use to replace the factory incandescent tail lights. Each…

It appears that your 2006 Keystone Raptor 3612 5th Wheel Toy Hauler has an axle spacing of 33" and uses the 5-3/4" wide short equalizer. I do recommend confirming this as if the suspension has been modified in the last 16 years by a…

The Keystone Carbon 417 should have a 35" axle spread which can be confirmed by measuring from the center of each axle. In which case, we have options from both Dexter and MORryde. The MORryde Rubber Equalizers for Triple Axle Trailers part…

Thank you for all of that excellent information and photos! To replace the front equalizer you need the Curved Equalizer #TREQ104 and then for the rear equalizer you need the Equalizer for 1-3/4" Wide Double-Eye Springs #TREQ105. To replace your…

For your Magic Chef Microwave MCD991ARB I recommend replacing it with the: -Greystone Standard RV Microwave #GR67FR. This microwave is slightly larger at 19" compared to your 18.3", but is comparable in height at 13-1/2" to your…

The only way will be to replace the entire assembly as the rear back plate is not available by itself. For that you'd need the part #RVSTLB61. The great news is that the price for this is very reasonable and you get an all new assembly.