Customers compare A46PB to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Thinline LED Light #MCL65CRB will allow you to replace the Incandescent Light #M154C which comes with the License Plate Kit #8880166 for the Yakima Rack and Roll trailer. The light housing is sealed to keep water out so it must be replaced as a…
view full answer...The Replacement 42" Cable for Breakaway Switch from Bright Way Group, #3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch…
view full answer...Yes, the Reflex Reflector Flange Cover part #A211RXB that you referenced does fit the GloLight LED trailer tail light part #STL1211RCFHPG that you also mentioned.
view full answer...The order of assembly is as follows (from the inside out). First, put the inner race in the back side of the hub, followed by the inner bearing, and then the seal. Insert the hub onto the spindle. Then, insert the outer race, followed by the outer…
view full answer...The two light illuminations of the light part #BUL603CRB are for a lower intensity red X and a bright white. It's really ideal as a taillight and reverse light. For a similar light that's designed for stop/turn and running light we…
view full answer...Given that trailer wiring only consists of basic light functions, 12 volt power, and brake output a system of fuses is not necessary because it is easy to determine if something is not working. If there was a short, the way you would know with or…
view full answer...While we have no specifics on wiring for any make or model of trailer and can only generalize it does sound like something very simple - you have overloaded your running light circuits which is causing the fuse to blow, and the reason for that is…
view full answer...I attached a diagram that shows how to match all of the wire colors of the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 to the wire colors on your 2017 GMC Canyon.
view full answer...Yes, The Thinline LED Clearance and Side Marker Light #AL91AB has 2 male connector posts on it. This waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. It is 2-1/2 inches long by 1-3/16 inches…
view full answer...The plug that is on the Black Bracket and Single Wire Plug #A65PB is designed for trailers that already have the type of plug-in wiring on the trailer (Plug-n-Go). The wiring that plugs into this end is not available but an auto parts store or store…
view full answer...Aluminum trailer frames or bodies can cause grounding issues so I suggest using a separate ground wire that runs from the rear of the trailer up to the main ground post in the junction box like #38656. You can join the ground wires for the individual…
view full answer...Though we do have direct replacements for the Grote 45253 light you have, they will be incandescent as well so won't be what you are looking for. With that said, as the spot where a light can mount will limit the size you can go with, I think the…
view full answer...