Kodiak Trailer Brakes 18TA-BLKIT Review Video

I believe what you mentioned is a standard way of running trailer brake lines on a tandem trailer. I attached a diagram for the brake line kit part #18TA-BLKIT and how it normally connects to a trailer. The main feed line runs to the first axle where…

Yes, the DeeMaxx Disc Brake Kit #DE66YR will allow you to use 14" trailer wheels.

Normally trailer brake lines are only used on trailers. However, if your vehicle has brake line fittings that match what the part #18TA-BLKIT has and the psi of the system does not exceed 1,600 psi this line could work for you as these are SAE…

The majority of brake line installations we do in our shop match the first method you have in the photo, labeled "Branch". We also prefer to use rubber hoses as they are easier to work with and there won't be an issue if you end up with…

I am not quite sure what the M stands for but the #L68149 bearing will be an exact replacement for your LM68149 bearing. The M used to be used but was dropped as it became irrelevant in the part number side of things.

The #20TA-BLKIT brake line kit you referenced is indeed compatible with the #AKUBRK-35-D Hydraulic Brake assemblies you'd looked at, the line kit is compatible with bolt disc and drum brake systems. The brake assemblies will be compatible with…

The Kodiak Hydraulic Brake Line Kit #18TA-BLKIT will work great for you, however I'd personally prefer to have some excess length just incase, so the Kodiak Hydraulic Brake Line Kit #20TA-BLKIT is what I'd go with. Both of these kits have a…

Yes, the Hydrastar Vented Electric Over Hydraulic Actuator, #HS381-8067, will work with the factory brake controller on your 2011 Ford F-350. The earlier Ford brake controllers had trouble with these types of system, but Ford changed the brake…

The DA91 Demco surge brake actuator that you are looking for is part #DM8750311. This has a 2-5/16" coupler, comes with an electric lockout, is designed for disc brakes, and has a weight capacity of 8,000 lbs towing and 800 lbs tongue weight.

Removing the check valve from the master cylinder for hydraulic drum brakes, like part #T1777401, enables it to put out a greater psi rating so that it will be compatible with hydraulic disc brakes that require the higher psi rating. If you are…

This does happen every now and then, but you will need the Dexter Replacement Emergency Breakaway Cable Kit #DX64XR. This is specifically for the A-60 actuators, which the #DX56FR is. With that said, on the bottom or underneath side of the inner…

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…