Customers compare AM32545 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Trailer wheel and tires like the part #AM32545 do not get balanced as it really doesn't make a difference and most of the time the weights just get bounced off due to the rougher suspension on trailers compared to vehicles. So if you wanted to…
view full answer...The trailer tire and wheel combination #AM3S862 is received from the supplier already with the tire mounted on the wheel. The supplier does not balance the combination, but when the tire is installed to the wheel they will line the high (heavy) spot…
view full answer...The Square Direct Weld Jack part #TJD-12000SP-F2 can be used in tandem. The only thing you would need to do this would be a cross shaft which would be some sort of bar that attaches the two output shafts to one another. This is assuming you want both…
view full answer...The main difference between the Square Direct Weld Jack part #TJD-12000SP-F2 and part #TJD-12000SP-R2 is the location of the plunger for the drop leg. The former has the plunger on the side of the crank handle and the latter has the plunger adjacent…
view full answer...A 225/75-15 tire will fit on a 5 to 7 inch wide wheel. This would work with wheel #TA37RR. I have included a link to the options for you.
view full answer...I have not heard anything along the lines of a custom cover for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 being manufactured. Currently the Classic Accessories Cover for 5th Wheel Trailer Hitch #CA80116 is the best cover for…
view full answer...Yes, you can switch from 205/75-14 tires to 225/75-15 tires if you have the clearance all around the existing tires. You will also need to replace the wheels though because a 15 inch tire will not fit on a 14 inch wheel. I recommend going with radial…
view full answer...Kenda Karrier ST225/75D15 Bias Trailer Tire with 15" White Spoke Wheel #AM32545 is balanced in a specific way. What manufacturers do is line up the light spot in the wheel with the heavy spot on the tire to achieve some balance. They are not…
view full answer...From the information you have given me, if I am correct your current axle should be 89" long when measured from hub face to hub face and from one spring center to the other is 74". To up grade to a 3500 lb axle without modification you need…
view full answer...I do have a solution for you, however, the smallest tire we have on a 13" wheel is part #AM31985 which has a load range of 1,610 lbs at 65 psi meaning it won't be strong enough for the 3,500 lb axle. The best option that you have is the…
view full answer...The 205/75-15 Tire and Wheel Combo, #AM32395, is 8.1 inches wide and 27.3 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
view full answer...