Erickson Tie Down Anchors - Trailer Tie-Down Anchors - EM59132 Review Video

Even though you do not have EZ lube axles you will be able to add EZ lube hubs and drums, however, you will not have the EZ lube feature on his axles by installing the EZ lube hub and drums. For you to be able to easily pack grease into your hubs and…

Yes, I went and pulled a Tow-Rax Low-Profile Floor Track #TWSP72TA from our warehouse as well as a Anchor Ring for Erickson O-Track Cargo Control System #EM59132 to test fit them together and found that they work perfectly with each other.

Since your axles are round it's actually best to measure with a set of calipers #PTW80157 instead of a tape measure, as you have to kind of eyeball and guess what the actual measurement is. Based on the picture you provided I can see you're…

Most of the weight distribution shanks like the #C17131 that you referenced are compatible with the heads of different brands systems. If the distance between the mounting holes on the shank you currently have are 1-1/4 inches apart and are 3/4 inch…

The Curt weight distribution shanks for 2-1/2 inch hitches also fit the Husky systems so if you don't need much drop the part #C17131 would be what you'd need or if you need a decent amount of drop you'd want the #C17132.

We don't carry TuffTow W/D kits, but a quick measurement of the width of the upright on your existing shank and the adjustment hole spacing will confirm if the Curt shank will work for you. As long as your current weight distribution hitch head…

Most weight distribution brands use the same dimensions for their shanks so they are interchangeable. If the holes on your shank are 3/4 inches in diameter and are 1-1/4 inch apart on center then we have shanks that will work. I attached a picture…

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56040 is confirmed to fit all models of the 2021 Subaru Outback Wagon, so you are correct that this will work with your 2021 Subaru Outback XT Onyx. For the trailer…

The Curt weight distribution shank part #C17131 that you referenced would be exactly what you'd need. This is compatible with your Pro Series weight distribution system since they both fit the same drop shank dimensions and it fits a 2-1/2 inch…

I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…

You definitely can use the Optronics Thinline LED Trailer Tail Light #STL64RB as a 3rd brake light! You'll need to cap off the black wire, ground the white wire, and then install the Pacer Performance 3rd Brake Light Logic Module #PP20-702…

If your 2021 Mercedes-Benz Sprinter 2500 has the factory step bumper, I suggest the Curt Trailer Hitch Receiver, #13358. If you have the standard bumper, then the Curt Trailer Hitch Receiver, #C13388. Both of these are Class III hitches that are…