2-1/2 inch Hitch Weight Distribution Shank for Husky Weight Distribution System

Question

Question:

My hitch has a 2inch shank while my new-to-me GMC has a 2 1/2inch receiver. I got the dealer to throw in an adapter, but Id like to replace the shank. I couldnt find anything on your site, so I thought Id ask for help...

asked by: Charles R

0

Expert Reply:

The Curt weight distribution shanks for 2-1/2 inch hitches also fit the Husky systems so if you don't need much drop the part # C17131 would be what you'd need or if you need a decent amount of drop you'd want the # C17132.

expert reply by: Jameson C

0

Answer 1

Most of the weight distribution shanks like the #C17131 that you referenced are compatible with the heads of different brands systems. If the distance between the mounting holes on the shank you currently have are 1-1/4 inches apart and are 3/4…

view full answer...

Answer 2

The membrane of the control panel for your Lippert Smart Jack Electric Trailer Jack w/ Footplate #LC643589 is not replaceable but you can use a cover like the Ultra-Fab Protective Cover for Electric A-Frame Jacks #UF38-944020 to prevent further…

view full answer...

Answer 3

Most weight distribution brands use the same dimensions for their shanks so they are interchangeable. If the holes on your shank are 3/4 inches in diameter and are 1-1/4 inch apart on center then we have shanks that will work. I attached a picture…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56040 is confirmed to fit all models of the 2021 Subaru Outback Wagon, so you are correct that this will work with your 2021 Subaru Outback XT Onyx. For the trailer…

view full answer...

Answer 5

The Curt weight distribution shank part #C17131 that you referenced would be exactly what you'd need. This is compatible with your Pro Series weight distribution system since they both fit the same drop shank dimensions and it fits a 2-1/2 inch…

view full answer...

Answer 6

Normally an intermittent working motorized jack like the Lippert Components Powered Tongue Jack #LC285318 is due to a faulty ground or a short circuit in the power wire. I recommend checking your ground connections, normally in the mount of the jack…

view full answer...

Answer 7

As with any manufacturer's recall, the old stock obtained by the vendors will be bought back from the manufacturer and replaced with the new updated version when available. The part number for the product rarely ever changes. I checked with our…

view full answer...

Answer 8

If you could please email me some pictures of the pin so I can see what is going on. Hitch pins and bolts don't have official capacities (though some bolts/locks might) because their actual capacity exceeds what most trailer hitches are rated…

view full answer...

Answer 9

I have another option, but the Blue Ox Track Pro Weight Distribution Shank for 2-1/2" Hitches #BLU26FR you were looking at is designed to work with the the Blue Ox Track Pro Weight Distribution System. Since you have the Blue Ox SwayPro Weight…

view full answer...

Answer 10

We have previously tested the Erickson and Tow-Rax O-Track Systems and found them to be compatible with each other. I went out to our warehouse to test the Erickson Anchor Ring #EM59132 on the Buyers Product Super Track #337ST93 and found it to be…

view full answer...

Answer 11

The buttons, face and controls on the Lippert Smart Jack Electric Trailer Jack w/ Footplate - A-Frame - 22-1/2" Lift - 3.5K - Black #LC643589 are not a replaceable part. You will have to use your warranty if you are within its time frame or…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

2-1/2 inch Hitch Weight Distribution Shank for Husky Weight Distribution System

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching