Customers compare EQ91-00-4250 to these similar products
Products Featured in this Video
Today we're going to be taking a look at Equal-i-zer high performance lubricant. This is a four-ounce bottle. It provides excellent lubrication for multiple towing applications. You can apply this to your hitch ball, weight-distribution head, spring-bar sockets or any other surface where friction can occur and that is designed to be lubricated. Once you have this on there, it's going to reduce the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
To install the etrailer Trailer Hitch Receiver #e73ZR on your 2019 Jeep Cherokee Trailhawk you will need the following tools. Torque Wrench #ALL944001 capable of 139lb-ft torque Ratchet Set #PT64VR with 13mm, 15mm, 21mm, and 3/4" sockets,…
view full answer...Thanks for the picture! The Equal-i-zer 2-1/2" Weight Distribution Shank item #EQ90-02-4800 that you referenced has 3/4" holes that are spaced 1-1/4" apart. If the head of your EAZ-Lift system has the same spacing then this shank would…
view full answer...Yes and almost yes...a lot of people refer to weight distribution systems as "equalizer hitches" in the same way that people refer to bandages as Band-Aids. Equalizer is a very well-known brand of weight distribution system that people are…
view full answer...The l-brackets on the Fastway e2 Weight Distribution Systems have not changed. As long as there are 6 bolt holes on the bracket then the Replacement Outer Link Plate part #FA93-02-5350 will work well for you. If you have an l-bracket with 8 bolt…
view full answer...The Replacement Outer Link Plate #FA93-02-5350 is the bracket piece that you are needing for the Fastway e2 Weight Distribution #FA94-00-1061 that you have. I do recommend getting the Replacement Hardware Kit #FA92-02-9200 as this will have all the…
view full answer...The benefits of an Equal-I-zer hitch over the e2 is primarily the improved 4-point sway control of the Equal-I-zer. The 4-point sway control utilizes steel on steel friction at the arms as well as in the hitch head to stop sway. The e2's 2-point…
view full answer...We do indeed carry replacement brackets for the Fastway e2, like #FA94-00-0800. If all you need is the L bracket, use #FA93-02-5150. The outer link plate is also available as part #FA93-02-5350 and the inner plate is part #FA93-02-5200. The hardware…
view full answer...The Replacement Sway-Control L-Bracket for Fastway e2 Weight Distribution Systems - 6,000 to 12,000 lbs #FA93-02-5150 is the same for both size systems you referenced. If you are upgrading your bars or just replacing a bracket you will be good to go.…
view full answer...Yes, the Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution #EQ95-01-5600 is rated for 6,000 lbs - 14,000 lbs Gross Trailer Weight. I have attached a review video that you can also check out.
view full answer...I'm not sure how to find out the age of your setup, but when I passed your photos along to my contact at Equal-i-zer he said that all you need to do for the upgraded system is swap out your 12K head unit for the 14K #EQ90-02-1400. Since your…
view full answer...There is a noise reduction lubricant available, the Equal-i-zer High-Performance Lubricant #EQ91-00-4250. This is designed to reduce the noise of their weight distribution systems, though you are correct that using the lubricant on the sway control…
view full answer...If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…
view full answer...