Customers compare K71-654-00 to these similar products
Products Featured in this Video
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the replacement 5 5/8 inch equalizers for the Dexter Axle E-Z Flex Heavy-Duty Rubber Suspension System. Now, these parts here will replace a damaged or worn out rubber equalizer on your Dexter E-Z Flex Heavy-Duty Rubber Suspension System. That system we do sell separately on our website, and it's part number… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…
view full answer...I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but…
view full answer...The Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 you referenced are simply replacements for the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers…
view full answer...There isn't an exact angle to go off of when it it comes to shackle straps, but we try to them to sit in a 'W' shape to allow for the suspension to travel without binding up. Depending on the length of the shackle straps the angle can…
view full answer...Hey John, I reached out to Dexter and they stated that they don't have these measurements for the Replacement Dexter Bolt-On Shock Kit #K71-697-00. I was able to get my hands on one and get the fully retracted length (pictures below), but…
view full answer...Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part #K71-654-00 which is compatible with what you have and will do a great job improving ride quality.
view full answer...To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…
view full answer...Yes, the Replacement 5-5/8" Equalizers for E-Z Flex Heavy Duty Rubber Suspension System #K71-654-00 will work for your trailer since the dimensions match with your current equalizers. These will work with axles up to 6,000lbs. I believe the kit…
view full answer...The equalizers in the kits #K71-652-00 and #K71-654-00 that you referenced are actually the exact same. The only difference between these kits is that the 652 comes with replacement shackle straps while the 654 only comes with the equalizers and no…
view full answer...Since the 33 inch wheelbase is very common there's a really good chance the correct EZ Flex kit is the part #K71-652-00 but we don't have a way to verify that. Aside from making the drive out there to check you could see if there's anyone…
view full answer...Based on the current condition of your Dexter EZ Flex kit it's going to be the best solution to replace the entire kit with the part #K71-653-00. This comes with the two new equalizers you need, all new shackle straps, new bolts, nuts, and…
view full answer...For the Lippert Bolt-On Shock Mount Kit for 3" Axle Tubes referenced in your question, part #LC281281, the minimum clearance needed from the inside of the tire to the I-beam flange on your trailer's frame (which is needed to install the…
view full answer...