Review of Demco Brake Actuator - DM5836 Video

Are you basically asking how much length would this coupler add to the tongue of your trailer?

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

Dexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part #DM5404 do a new actuator. The part #DX97FR is just the inner section of an actuator though. For the actuator you'd need the part…

The Dexter brake actuator part #DX89FR that you referenced can be used with tandem axle disc brake trailers.

The Brophy Camper Scissor Steps part #AS24 will require 1-1/4" of clearance between the bottom of the door and bottom of the cab on your Palomino Truck Bed Camper in order for the mounting bracket to attach. If you removed a portion of the…

While we don't offer a version of the Demco Actuator part DM72VR with a reverse lockout we do offer a lockout that will work great with it that you can order separately with it as part #DM5836.

I was able to confirm with my contact at Lippert that you can use the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper Jack Systems #LC733540 to replace the circuit/control board on your corded HappiJac system. You can…

On the backside of the mounting plate of the Hydraulic Brake Kit part #AKFBBRK-35-D is a fitting covered by a red cover that you'd use to bleed them. Like with most brake bleeding methods you'll need someone to pressurize the brake lines…

The torque specs for the Hydraulic Brake Kit #AKFBBRK-35-D are 45-70 foot lbs and for your Titan Actuator T43329007K the bolts should be tightened to 80 foot lbs.

Best option would be to install free-backing brake assemblies on your trailer as they allow the trailer to be reversed and not have the brakes apply. For example if you have 3,500 lb axles on your trailer you'd want the kit part #AKFBBRK-35-D…

There are a few pieces of information that you will need to know when looking for replacement drum brakes. First of all you will need to know the weight capacity of your axle so you can choose drum brakes that will be able to safely stop your…

That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…