Recommended Sway Control System For An Aluminum Frame Trailer
Question:
Still seeking a suitable friction sway control solution for my 2024 Intech O-V-R Expedition travel trailer that does not require drilling into Intechs all-aluminum frame or undercarriage during installation. Tow vehicle is a 2017 Range Rover HSE Td6 using Andersens 3298 rack and 2-5/16inch combo ball drawbar assembly used to provide the 8inch rise needed to meet the Intech coupler. Friction sway control is desired due to Land Rovers OEM caution not to use a WDH. I do not want to penetrate any of the 2x6inch aluminum structure of the trailer frame. Even the Tucson Electronic Sway Controller required drilling a crossmember to mount the unit to the trailer 5foot - 10foot aft of the coupler. Any solution ideas would be appreciated. Thanks.
asked by: Jim H
Expert Reply:
Hi Jim,
Since you can't use a weight distribution hitch and don't want to drill through the aluminum frame I recommend attaching the Curt True Course Advanced Bluetooth Trailer Sway Control # C94VV to a board and using some U-bolts to clamp the board to the frame. Once mounted you'll just need to plug your trailer's 7-way cable into it and use the True Course 7-way cable to plug into your Range Rover.
You will not be able to use any sort of friction sway control without drilling into the frame to mount a bracket for the sway bar to connect to.
Products Referenced in This Question
Curt True Course Advanced Bluetooth Trailer Sway Control - 1 to 4 Axles
- Weight Distribution Hitch
- Sway Control Only
- Severe Sway
- CURT
more information >
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is There Trailer Sway Control that Doesn't Require Drilling
- Shop: Replacement 60 mm x 90 mm U-Bolt for Thule Canyon XT Roof Cargo Basket - Qty 1
- Shop: Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution - 6,000 lbs to 14,000 lbs GTW
- Shop: Replacement U-Bolt for Thule Canyon and Thule Trail Roof Cargo Basket - 50 mm x 90 mm
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Search Results: sway bar bracket
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 6K GTW, 600 lbs TW
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: Which Hitches are Made in the USA
- Article: Trailer Wiring Diagrams
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Shop: Trailer Wiring
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Shop: Brake Controller
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: How to Choose the Right Trailer Hitch Class
- Video: BOLT Trailer Hitch Receiver Lock Review
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle