Replacement Roof Vent Lid for 2018 Heartland Sundance ID291QB

Question

Question:

Looking for the correct top vent cover only. Model trailer: 2018 Heartland Sundance ID291QB Will include photos below of one I need to replace.

asked by: Marty D

0

Expert Reply:

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part # BVD0449-A01 that you referenced if you wanted white or the part # BVD0449-A03 for the same smoke color you have now.

expert reply by: Jameson C

0

Rooof Vent Lid on Heartland Sundance
(click to enlarge)

Answer 1

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008,…

view full answer...

Answer 2

I do have an option but without the model number of the vent, it can be hard to really confirm the correct replacement lid as comparing hinges and measuring can only get you so far. Therefore, a much better option would be to go with a universal…

view full answer...

Answer 3

The hinge looks VERY similar to the part #BVD0449-A03 that we offer but slightly different possibly as it's hard to see in the picture. Does the #BVD0449-A03 look like what your roof vent had prior?

view full answer...

Answer 4

Most square trailer roof vents are the 14 x 14 size that fit into a roof opening of 14-1/4 x 14-1/4-inches. This is the vent size that Replacement Dome Assembly #BVD0449-A03 will fit. You will want to check the type of hinge you have on your vent…

view full answer...

Answer 5

We will have a cover that will work for your trailer vent. The standard measurement for this type of cover is 14x14 inches. We will need to know what type of hinge your current cover has to make sure that you receive that correct cover. The attached…

view full answer...

Answer 6

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 8

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 11

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 12

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Replacement Roof Vent Lid for 2018 Heartland Sundance ID291QB

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching