Replacement Vent Lid for Rockwood Forester Pop-Up Camper

Question:

HELP! Several of your covers look similar, but not quite the same. In your answers re vent covers, my vent has a hinge pattern like you show in picture #69824 by Jameson C. However, when I measure my vent cover I get 13 1/8 wide on the hinged side and 13 7/8 on the other sides. its slightly domed at 2 high and white. Dont need exact duplicate if I can get it to fit. I went and measured my hinges and compared them to the hinge pattern at picture #69824. I have 3 metal hinges at 2 1/8 wide within plastic ends that are 2 3/8 wide . . . however when I measure these metal hinges center to center my hinges are 4 3/4 apart vs his which are at 4.5. Any suggestions?

asked by: Paul E

Expert Reply:

I do have an option but without the model number of the vent, it can be hard to really confirm the correct replacement lid as comparing hinges and measuring can only get you so far. Therefore, a much better option would be to go with a universal lid, the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent part # MA00-335001 is what I recommend.

expert reply by: Conner L