Replacement Capnuts For Yakima 54" Tracks

Question

Question:

Is this compatible with the 54inch Yakima tracks? Thanks!

asked by: David

0

Expert Reply:

Yes, the capnuts for the 60" tracks # Y01135 and 54" tracks # Y26RR are the same so part # Y8810155 would be the correct fit for your 54" tracks.

expert reply by: Kevin C

0

Answer 1

We do have the part #Y8810155 and it is in stock. I also attached pictures of the install instructions for the tracks part #Y01135 as well.

view full answer...

Answer 2

The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks #Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks #Y01126 or the Yakima 54" Tracks for Roof Racks #Y01127 both these tracks include the PlusNut…

view full answer...

Answer 3

The Replacement PlusNut Hardware for Yakima Roof Rack Tracks #Y8810102 works only to replace the original PlusNut and washer on Yakima 42" #Y01126 or 54" #Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit #Y8880039.…

view full answer...

Answer 4

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

view full answer...

Answer 5

While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine…

view full answer...

Answer 6

The bolts in the Replacement Capnuts, Washers and Bolts #Y8810155 are 1" long. They are #10-32 thread if you would like to acquire some longer bolts from a local hardware store.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Replacement Capnuts For Yakima 54" Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching