bing tracking image
Q & A Icon

Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic  

Question:

Do you have videos/directions on REMOVAL of yakima baseline? Someone else installed this on my car and I cant find any resources online as to how Im supposed to take this off my car I have a 2016 honda civic, fitted with yakima 48 roundbars, custom baseclips for my car, and the roundbar SI adapter

0

Expert Reply:

While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process.

This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench.

First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have the standard black plastic caps you will just need to pry from the top of the end cap to remove it.

Next you will flip the gray latch over which will expose the fastener securing the fit kit to the roof. You will need the tightening tool that came with the BaseLine Towers and use it to loosen the fastener which can be accessed in the center hole shown in the picture I included. Loosening this fastener will take the tension off of the fit kit and allow you to remove the assembly from your Civic.

I would mark each fit kit front or back as they are different fit kits which are # Y06182 for the front and # Y06183 for the back.

You can either keep the towers attached to your Round 48" CrossBars # Y00408 or using the tightening tool you can loosen the fastener located at the bottom of the tower right underneath the crossbar to remove the crossbars from the tower.

expert reply by:
0
Samuel C
click to enlarge

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>