Bolt Size that Comes with Replacement Capnuts, Washers and Bolts for Yakima # Y8810155

Question

Question:

I have this hardware kit, but I am needing 1.5” long bolts. Is there any way you could tell me the size of the included bolts? Thanks,

asked by: K. T

0

Expert Reply:

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

expert reply by: Jameson C

0

Answer 1

The bolts in the Replacement Capnuts, Washers and Bolts #Y8810155 are 1" long. They are #10-32 thread if you would like to acquire some longer bolts from a local hardware store.

view full answer...

Answer 2

If the instructions for the Yakima 60" Tracks for Roof Racks #Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part #Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use…

view full answer...

Answer 3

There isn't a pdf of a track fit sheet but basically it wants you to select the tracks that won't be too long to fit your camper shell. It also tells you to be sure to place the tracks equal distance from the rear of the camper shell and from…

view full answer...

Answer 4

The Replacement Bracket #8880735 measures 18-3/8" long and 2-3/4" wide. It is used on Yakima Skyrise tents such as Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs #Y07436.

view full answer...

Answer 5

The Replacement PlusNut Hardware for Yakima Roof Rack Tracks #Y8810102 works only to replace the original PlusNut and washer on Yakima 42" #Y01126 or 54" #Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit #Y8880039.…

view full answer...

Answer 6

We do have roof rack options that will allow you to use a Rhino Rack roof rack on your van with a fiberglass roof. You can install the Yakima 42" Tracks for Roof Racks #Y01126 using the Capnuts, Washers and Bolts for Yakima Tracks #Y8810155 for…

view full answer...

Answer 7

Yes, the Replacement PlusNut Hardware Kit #Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks #Y01135. This hardware kit is designed for use with sheet metal roof applications.

view full answer...

Answer 8

The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks #Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks #Y01126 or the Yakima 54" Tracks for Roof Racks #Y01127 both these tracks include the PlusNut…

view full answer...

Answer 9

Yakima has the T-bolt kit part #Y8880184 which includes a quantity of 4 T-bolts that are designed to fit in the tracks of their roof channels like what you have. These come with lock nuts as well.

view full answer...

Answer 10

The Replacement PlusNut Hardware Kit, part #Y8880039 you asked about are 10-32 mm with a thread pitch of .75 inch according to our contact at Yakima.

view full answer...

Answer 11

The MaxxAir MaxxFan Plus - Smoke #MA00-04500K will work on your fiberglass truck cap, but highway speeds will not allow it to stay open. The remote will work fine from inside you truck cab. If you want to be able to drive the highway speeds, I…

view full answer...

Answer 12

Once closed, the MaxxFan Dome Plus Roof Vent w/ 12V Fan, #MA00-03810W does not let light in. You can open the vent and not turn on the fan. This fan fits roofs that are 1" to 6" thick, so you would need to build up the roof of your trailer…

view full answer...

Bolt Size that Comes with Replacement Capnuts, Washers and Bolts for Yakima # Y8810155

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching