Parts Needed to Add Reverse Function for TecNiq LED Trailer Tail Light

Question

Question:

My trailer doesn't have a connection for the backup feature. How do I add it so I can use this light?

asked by: Fred

0

Expert Reply:

To add the reverse function on your trailer you need a 7-Way connector and enough wiring to run from the front to the back of your trailer. Here are the parts you need to get the wiring from your tow vehicle back to the TecNiq LED Trailer Tail Light # TN33XR:

- Junction Box Kit # 3430001-JBK
- 7-Way Molded Trailer Wire Connector # H20043
- 16 Gauge Wire # 16-1-1
- Butt Connectors # DW05744-10
- 3-Wire Pigtail # A45PMB (per light)
- 2-Wire Pigtail # A42PMB (per light)

expert reply by: Jon G

0

Answer 1

Because the 8-14.5 tire that you've got sits on a 14.5" wheel, so you wouldn't be able to switch tire sizes with anything that we have available without also switching to a new wheel as well. If you've got a 6 on 5-1/2" bolt…

view full answer...

Answer 2

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 3

It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub #AKIHUB-545-35-G-K for standard spindles or…

view full answer...

Answer 4

Heavy duty ramp springs #RS16933RH and #RS16933LH install on the hinge of the ramp. I have included a picture of what this looks like for you. Not all trailers are exactly the same but this should give you a general idea of how the springs install.

view full answer...

Answer 5

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 6

If you are looking for a walkthrough video of how to install a hitch on a 2022 Toyota Corolla, the attached video of the Curt Hitch #C11567 being installed on a 2020 Toyota Corolla Hatchback will be nearly identical to the process on your 2022 model.…

view full answer...

Answer 7

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Parts Needed to Add Reverse Function for TecNiq LED Trailer Tail Light

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching