Replacement Short Arm for Thule OutWay Bike Rack

Question

Question:

I have a Thule bike rack on my 2021 Thor Tellaro. I need to replace the short arm assembly. Will this part replace it?

asked by: James B

0

Expert Reply:

Thanks for the picture. Based on that what you would need is the part # TH68JH that you mentioned.

expert reply by: Jameson C

0

Thule Short Arm Bike Rack
(click to enlarge)

Answer 1

The Replacement Bike Clamp Assembly, #7521537001, is a replacement bike clamps that is unique to the Thule Raceway Platform-Style Bike Rack, #TH9003. I have attached a photo of the arm of the Raceway platform-style bike rack, #TH9003, showing the…

view full answer...

Answer 2

Yes, you will be able to move your lock cores from your old arms on your Thule EasyFold XT Bike Rack #TH903202 when you install the new Short Arm #7525491002 and Long Arm #1500052414 assemblies. To move the locks you will need either the Change Key…

view full answer...

Answer 3

I reached out to Thule and they said that even though they cannot confirm for sure whether the Replacement Short Arm Assembly for Thule EasyFold XT Electric Bike Rack #7525491002 will fit your non-Thule rack, there is a way for you to confirm the…

view full answer...

Answer 4

To open the Replacement Short Arm Assembly #7525491002 or Replacement Long Arm Assembly #1500052414 on your Thule Thule EasyFold XT Bike Rack #TH903202 there are multiple steps you must follow. There are images on page 7 of the instructions that I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Short Arm for Thule OutWay Bike Rack

Product Page this Question was Asked From

Continue Researching