Solution for Replacement Arm for Dometic Awning.  

For your 81-1/2 inch measurement you can replace the support arms on your Dometic spring-loaded manual awning with the Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms #LC434720 (White) or #LC434719 (Black).

We have universal support arms for awnings that do fit the Dometic awnings like what you have. For example, we have the part #LC434720 for arms that are between 81 and 96 inches, part #LC434718 which can be between 68 and 81 inches in length, and…

The correct replacement option depends on the length of the arms that you are replacing. The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual…

Based on my research the 3310766.113P part number you mentioned is for a Dometic awning replacement arm assembly, which you are correct is no longer available. What we do have though is the Solera Classic Universal Awning Support Arms #LC434720 for…

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on…

Though we do not sell just one arm by itself The Solera Classic Universal Awning Support Arms for RVs - 81 inch to 96 inch Arms - White #LC434720 comes with the whole kit. This kit is designed to replace the existing support arms on your Dometic,…

Sorry to hear about your awning mishap but we can help you with a set of new awning arms you can use with your existing setup on your 2017 Keystone Bullet. Please refer to the linked page that displays replacement awning arms. We have kits for flat,…

If you have a Dometic spring-loaded manual awning on your 2015 Coachman Catalina 213BH we do have replacement awning support arms which will work; you simply need to choose the correct length and color from the following: - Solera Classic Universal…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.