bing tracking image
Customer Service My Orders
Q & A Icon

How to Determine if 2,000 lb Electric Trailer Brakes Will Fit  

Question:

Hello, I am struggling to find answers. I have a very old and light pop up camper. 1978 Viking saga, with 2000 lb GVWR. I would like to install brakes on it. I have 8 inch rims but do not know much about trailer brakes, and cannot seem to find any for my trailer. Please help!

0

Expert Reply:

I can help you out here, and there are a couple of things you'll need to know to determine the fit of 2,000 lb electric trailer brakes. First, you'll need to make sure you have the correct brake mounting flange on your axle, one that has hole spacing 2-7/8" on center.

If you don't, you can have one welded on with part # 4-34. The other thing you need to have is a hub with a 7" inner diameter for the brakes to fit in. I made a diagram for you below which may help, and that's all you need for fit - the correct brake flange mounting hole spacing and hub diameter. If you have that, then what you need is the following:

- Dexter Electric Trailer Brake Kit # 23-47-48

- Brake Adjustment Spoon for Drum Brakes # W80630

The brakes come with mounting nuts, but you also need the washers. You will need either eight of the Lock Washer # 5-8, or just get the Mounting Hardware for 7" Brake Assemblies # BRKH7.

expert reply by:
0
Kyle S
Brake Flange Mounting Hole Spacing & Hub Diameter
Brake Flange Mounting Hole Spacing & Hub Diameter
(click to enlarge)
Ask The Experts a Question >>

Products Referenced in This Question





Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Dexter Electric Trailer Brake Kit Installation
Dexter Electric Trailer Brake Kit Installation - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>