Installing a Trailer Brake Controller on a 2004 International 4300
Question:
I have a 2004 international 4300 with hydralic brakes. I would like to install a brake controller along with a 7 way pin. I have found a 7 wire plug in the frame rail behind cab containing the wires for lights signals etc. but Im lost after that.
asked by: Ray P
Expert Reply:
In order to install a brake controller on your 2004 International 4300 you will need to use those wires you have found and wire them into the # ETBC7 kit. You will have to cut off the 4-Way on the ETBC7 and then use a circuit tester like # PTW2992 if you need one to determine the functions of the wires on the truck.
You will then need to connect them to the 4-Way wires on the ETBC7. Brown is for running lights, yellow is for left turn and brake, and green is for right turn and brake.
Then mount the 7-Way and attach the white wire to the vehicle frame. From there you will need the wire and circuit breakers in the ETBC7 kit to hardwire the rest of the ETBC7 wires and the brake controller. I have included some links to the right that explain how the installation will go from there. Once completed your P3, # 90195, will be ready to go.
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Leveling Scissor Jack - 24" Lift - 5,000 lbs
- Search Results: scissor jack
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Dexter Trailer Hub and Drum Assembly for 7,200-lb Axles Manufactured After 1999 - 8 on 6-1/2
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Shop: Buyers Products 45 Ton Pintle Hook
- Search Results: ph45
- Q&A: Mounting Hole Bolt Pattern For Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook # 337P45AC4
- Shop: Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook
- Shop: Buyers Products 30 Ton Pintle Hook
- Search Results: pintle hook
- Article: Trailer Hitch Receiver Sizes
- Search Results: rg03~120
- Shop: Thule Wall Organizer - 33-1/2" Tall x 19-1/2" Wide
- Search Results: ramp assist
- Search Results: ramp assist springs
- Q&A: Wiring a Brake Controller to a 2007 International Trucks 4300 Series
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: 76023
- Shop: Tonneau Cover
- Q&A: Brake Switch Location to Install a Brake Controller on a 2004 International 4300
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415