Trailer Hitch Receiver and 4-Way Wiring Harness For 2022 Subaru Legacy

Question

Question:

when i find the right hitch for my 2022 subaru legacy the video that comes up for it is for outback wagon, are these 2 vehicles the same?

asked by: Robert S

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR that you found is confirmed to fit your 2022 Subaru Legacy.

For towing, your 2022 Legacy will need the Vehicle Wiring Harness # C79CR which is vehicle specific.

expert reply by: Bud M

0

Answer 1

We actually have a trailer hitch receiver that fits a 2022 Subaru Legacy right now! It is a Class III, 2" hitch receiver, and is the following part number: - etrailer Trailer Hitch Receiver #e25TR There is even a 4-way trailer wiring harness…

view full answer...

Answer 2

The Stealth Hitches Hidden Rack Receiver item #391SUOB20 you selected will not fit your 2020 Subaru Legacy. The closest equivalent hitch receiver that is compatible with your 2020 Legacy is the EcoHitch Hidden Trailer Hitch Receiver item #EH36RR.…

view full answer...

Answer 3

The Curt Class III hitch, part #C67JR is a fit for all models of the 2020 and 2021 7th Gen Subaru Legacy, including the Touring XT. If you'll be using the hitch for towing, you'll also need a trailer wiring harness like #C79CR, a ball mount…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR is a confirmed fit for a 2020 Subaru Legacy (All Models Including Base, Premium, Sport, Limited, Limited XT and Touring XT) and what I recommend since it offers the easiest bolt-on…

view full answer...

Answer 5

The trailer hitch we offer for a 2020 Subaru Legacy with the best ground clearance is the Curt Trailer Hitch Receiver part #C67JR as it sits directly underneath the rear bumper. The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR would sit…

view full answer...

Answer 6

Yes, it does! The Curt Hitch item #C69VV has been confirmed to fit the 2024 Subaru Legacy. This hitch is custom fit and bolts to your Subaru with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity…

view full answer...

Answer 7

Since there were no changes to the Subaru Legacy in 2022 the etrailer hitch part #e25TR is a confirmed fit for it. Then for trailer wiring we have the Curt #C79CR which would work great as well.

view full answer...

Answer 8

According to Curt, the #C67JR Class III hitch fits all models of the 2021 Subaru Legacy, including the Premium and Sport. The only near-plug and play trailer wiring harness available would be the Curt #C79CR which does require that a circuit be ran…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch Receiver and 4-Way Wiring Harness For 2022 Subaru Legacy

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching