Trailer Hitch and Wiring that Fits 2022 Subaru Legacy

Question

Question:

Will this fit my 2022 legacy?

asked by: Chris K

1

Helpful Expert Reply:

Since there were no changes to the Subaru Legacy in 2022 the etrailer hitch part # e25TR is a confirmed fit for it. Then for trailer wiring we have the Curt # C79CR which would work great as well.

expert reply by: Jameson C

1

Answer 1

The screw associated with the discontinued 852-3134-001 you mentioned is the part #852-3136-001 which is a M8x30.

view full answer...

Answer 2

All models of the 2023 Subaru Legacy will require minor trimming to get the EcoHitch #EH36RR installed. This is not limited to EcoHitch and instead is required for every hitch that fits your vehicle. I went ahead and included a cutout from the…

view full answer...

Answer 3

The Curt Class III hitch, part #C67JR is a fit for all models of the 2020 and 2021 7th Gen Subaru Legacy, including the Touring XT. If you'll be using the hitch for towing, you'll also need a trailer wiring harness like #C79CR, a ball mount…

view full answer...

Answer 4

The Stealth Hitches Hidden Rack Receiver item #391SUOB20 you selected will not fit your 2020 Subaru Legacy. The closest equivalent hitch receiver that is compatible with your 2020 Legacy is the EcoHitch Hidden Trailer Hitch Receiver item #EH36RR.…

view full answer...

Answer 5

The trailer hitch we offer for a 2020 Subaru Legacy with the best ground clearance is the Curt Trailer Hitch Receiver part #C67JR as it sits directly underneath the rear bumper. The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR would sit…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT73RR that you found is confirmed to fit your 2022 Subaru Legacy. For towing, your 2022 Legacy will need the Vehicle Wiring Harness #C79CR which is vehicle specific.

view full answer...

Answer 7

We actually have a trailer hitch receiver that fits a 2022 Subaru Legacy right now! It is a Class III, 2" hitch receiver, and is the following part number: - etrailer Trailer Hitch Receiver #e25TR There is even a 4-way trailer wiring harness…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT73RR is a confirmed fit for a 2020 Subaru Legacy (All Models Including Base, Premium, Sport, Limited, Limited XT and Touring XT) and what I recommend since it offers the easiest bolt-on…

view full answer...

Answer 9

According to Curt, the #C67JR Class III hitch fits all models of the 2021 Subaru Legacy, including the Premium and Sport. The only near-plug and play trailer wiring harness available would be the Curt #C79CR which does require that a circuit be ran…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Trailer Hitch and Wiring that Fits 2022 Subaru Legacy

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching