Will The Inno Phantom 466 Fit On My 2017 Ford Escape

Question

Question:

My wife has a 2017 Ford Escape which has a small antenna on the roof just before the rear hatch. If I’m using the factory roof rails, will the box sit high enough to clear the antenna with the box back toward the hatch.

asked by: Patrick K

0

Expert Reply:

Yes, if you are using the factory roof rails for your roof rack, you will have plenty of clearance for the Inno Phantom 466 Rooftop Cargo Box - 18 cu ft - Gloss Black, part # INBRM466BK. The antenna on the rear of your vehicle sits below the rails of your 2017 Ford Escape because the slope of the roof at the rear of your vehicle.

I have included a video review of the Inno Phantom rooftop cargo box below.

expert reply by: Mark Smith

0

Answer 1

I checked with Thule, and the Thule Force XT cargo box which will fit your Ford Escape is the Thule Force XT L Rooftop Cargo Box #TH6357B. The Force XT is a great option for a cargo box because of how easy it is to use and install while also…

view full answer...

Answer 2

The Yakima SkyBox 21 #Y07337 is confirmed to fit the factory roof rack on your 2017 Ford Escape. To ensure that the roof box does not interfere with being able to fully open the rear hatch, you will want find the rear hatch clearance. You can find…

view full answer...

Answer 3

The best solution for a cargo box on your 2017 Ford Escape with factory crossbars is hard to say without more info like how much cargo do you need to carry in it etc. But I can say that the Thule Pulse Medium part #TH614 that you referenced is a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 9

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 10

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

Answer 11

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Answer 12

You will be able to use the Inno Wedge 660 Rooftop Cargo Box #INBRM660WH on your 2024 Subaru Outback Limited. It requires a crossbar spread of 23-1/2" - 39-1/2" which is the same as the Shadow.

view full answer...