Replacement Stop/Turn/Taillight With Back Up Lamp for Eagle Boat Trailer

Question

Question:

Can this light be used as a brake/signal, running and backup light? Looking to replace the two oval incandescent lights on the back of my Eagle boat trailer.

asked by: Derek

0

Expert Reply:

The Optronics # BUL602CRB is a 2-function lamp, taillight and back up lamp so it won't function in the fashion you're wanting. The good news is that we have a grommet mount lamp that will provide stop/turn, taillight and back up lamp functions, part # STL211RB. If the existing lamp is a 6-1/2 x 2-1/2, this would make a great replacement. If the lamp has been in place for a number of years, you'll want to replace the grommet as well. We offer them as part # A70GB.

You'll also need a 2 wire # A45CB and a 3 wire # A45PB pigtail.

expert reply by: Mike L

0

Answer 1

The replacement strap is Fulton Heavy-Duty Winch Strap with Hook part #FWS20HD0200 is a 20 foot long, 2 inch wide strap that would work great to replace the T1801 that you have currently.

view full answer...

Answer 2

It will depend on the width of the strap that your winch can handle, but something like the Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs #FWS20HD0200 has a safe working load limit of 4000-lbs and will work on hand winches…

view full answer...

Answer 3

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 4

The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 #HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33 to 35 inch on center axle spacing.

view full answer...

Answer 5

The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter #MA85VR is made from mill finished steel with a commercial die cut quality, however they are not coated with any rust preventative. With that being said, it would absolutely be…

view full answer...

Answer 6

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 7

Yes, the Optronics Mini Thin Line LED Marker/Clearance Light #AL191AB can be flush-mounted using the Optronics Flush Mount Grommet #A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows…

view full answer...

Answer 8

I would be happy to help! The Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens #STL68RP5B you were looking at is sold in a quantity of one, so if you are needing two tail lights you will need to order a…

view full answer...

Answer 9

I would be happy to help. The correct replacement return spring for the jack feet on your 10,000lb side wind jack will be dependent on which brand it is. For example if you have an etrailer or Ram branded jack such as the #TJD-12000SP-F2 then you…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Stop/Turn/Taillight With Back Up Lamp for Eagle Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching