Comparing Fusion LED Trailer Tail Light STL68RP5B and STL68RB

Question

Question:

Question are these lights sold as each-1 or pair-2? Also what is the difference between the fusion stl68 lights 1 says it’s 4 wire pigtail and other is 5 wire but they both do same thing?

asked by: Chris

0

Expert Reply:

I would be happy to help!

The Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens # STL68RP5B you were looking at is sold in a quantity of one, so if you are needing two tail lights you will need to order a quantity of two.

The difference between the # STL68RP5B with 5 wires and the # STL68RB with four wires is that the 5 wire version has separate turn signal and brake lights, where the 4 wire version has these combined like a standard trailer light.

Unless your trailer has separate turn signal and brake light wiring which is not very common, then you will want to go with the # STL68RB.

I included videos for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Good news Les, I don't think your diodes are dying in the light. It sounds like there is a wiring issue with the lights because they work with the brake and turn signals like you mention. It sounds like either there is a bad connection with the…

view full answer...

Answer 2

The Timbren #TFR350CC is a fit for a 2011 Ford F-350 Cab/Chassis Truck, as confirmed by Timbren. Measured from the bottom of the rubber Aeon spring to the top of the mounting bracket (see photo), the spring is 7-5/8 inches tall. You can see a product…

view full answer...

Answer 3

Yes, the Optronics Mini Thin Line LED Marker/Clearance Light #AL191AB can be flush-mounted using the Optronics Flush Mount Grommet #A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows…

view full answer...

Answer 4

Going by the colors that you mentioned, it sounds like you have the typical set-up, green wire for right turn and brake, white wire for ground, yellow wire for left turn and brake, brown with green wire for right side running lights, and brown with…

view full answer...

Answer 5

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 6

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2"

view full answer...

Answer 7

The problem has to be in the wiring you are using, unless the light itself is defective which is most likely not the case. I would recommend you take the light out and test each of the functions with a known working car battery. You can do this under…

view full answer...

Answer 8

If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let me know. If…

view full answer...

Answer 9

I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally set.…

view full answer...

Answer 10

I have a solution for you, but since you're switching from incandescent to LED lights and taking into consideration the size of light you're going to need, I won't be able to recommend a 4 function light that covers all of those criteria;…

view full answer...

Answer 11

The Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens #STL211XRFHB will function off the same 12V of a van as the 12V of a trailer so you shouldn't have any issues. There is a difference in amperage…

view full answer...

Comparing Fusion LED Trailer Tail Light STL68RP5B and STL68RB

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching