Factory Connection Points to Add Trailer Wiring and a Brake Controller on a 2005 Dodge Durango
Question:
I have a 2005 Dodge Durango with the Hemi engine. It has the factory trailer tow package. Where is the wiring harness for the electric brake system to attach to
asked by: Tom
Helpful Expert Reply:
If you are talking about the connection point for a brake controller then you can find the factory connection underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
If you are talking about adding a 7-Way, the factory connection point for a 7-Way trailer connector on a 2005 Dodge Durango is located behind the rear bumper or along the driver side frame rail on the drivers side of the vehicle. There will be a rectangular plug. You will most likely have to clean it out first and then install a replacement 7-Way, # 20135.
If your Durango did not come with a factory installed 7-Way to start with, you will need to first install a 4-Way using # 118390 and then install # ETBC7. I have included some links that will help with these installations.
For a brake controller I recommend the Tekonsha P2, # 90885, because of its reliability and ease of use. If your Durango did originally come with the factory 7-Way you will also need harness # 3020-P. If you have to use the ETBC7 then you will not use this harness and will follow the ETBC7 hardwire instructions.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Will the Pintle Hook # 63015 Attach to the Super Titan Pintle Hook Plate # RP38186
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550