Can The Lockable Dual Trimmer Rack for Open Utility Trailers Be Mounted On Round Tube Trailers

Question

Question:

I have the trimmer mount for a open utility trailer. But I have a round tube frame trailer and I don’t see how this will font my trailer can you help?

asked by: Tony W

0

Expert Reply:

All of our trimmer racks like the Lockable Dual Trimmer Rack for Open Utility Trailers # 288-01811 are bolt-on. So, you'd either need to run a bolt through the tube on your trailer, or you'll need to run U bolts around the tube.

expert reply by: Bryce D

0

Round Tube Frame Application
(click to enlarge)

Tony W.

2/8/2022

I have the trimmer mount for a open utility trailer. But I have a round tube frame trailer and I don’t see how this will font my trailer can you help?

Reply

Bryce D.

2/9/2022

Like I had mentioned before, all of our trimmer racks like the Lockable Dual Trimmer Rack for Open Utility Trailers # 288-01811 are bolt-on. There is no kit available to work with a round tube frame, unfortunately, so, you're going to either need to run a bolt through the tube on your trailer, or you can run some U bolts around the tube. I have attached a picture of a neighbor that has attached the Lockable Dual Trimmer Rack # 288-01811 to their round tube frame utility trailer so you can get a visual on how you could possible accomplish this.

Reply

Answer 1

All of our Trimmer Racks are bolt mounted, so you will have to custom mount them on a round top rail. You will either have to run bolts through your tube or run U-Bolts around your top tube. For a Trimmer Rack, I recommend the Pack'Em Rack…

view full answer...

Answer 2

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 3

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 4

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 12

The "radio" fuse of your 2014 Honda CR-V will need to be pulled and replaced with the Roadmaster FuseMaster Fuse Bypass part #RM76511. This product will make it easy to deactivate this circuit, you will only need to flip a switch instead of…

view full answer...

Can The Lockable Dual Trimmer Rack for Open Utility Trailers Be Mounted On Round Tube Trailers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching