Correct Air Lift Air Bags for a 2003 Ford F-250

Question

Question:

Good morning e-trailer team, I am seeking a rear Air lift system for our 2003 F250 SD, with leaf spring suspension. Please let me know your recommendations. Thank you,

asked by: Jeffrey W

0

Expert Reply:

The Air Lift LoadLifter 5000 Air Helper Springs part # AL57390 are correct for a 2003 Ford F-250. It offers a bolt-on no drill install with great support for heavy duty towing or hauling. The F-250's all have rear leaf springs so that won't be an issue.

expert reply by: Conner L

0

Answer 1

There has been some fit issues with the Reese Ball Mount - 3-1/2" Rise, 5" Drop - 10" Long - 18,000 lbs Item #RP45323 and the factory Ford 2-1/2 inch trailer hitches so I recommend taking a look at a different option. I have included a…

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Air Helper Springs #AL57390 that fit a 2004 Ford F-250 Super Duty do not have a specified pressure you should inflate the bags to for a load ranging from 6,000 lbs to 8,000 lbs. As you can see by the cut out of the linked…

view full answer...

Answer 3

We have both options available for you the Curt 2" Hitch Ball part #C69FR and the Curt 2-5/16" Hitch Ball part #C49FR are both compatible. They offer the 1-1/4" shank required for the Curt Heavy Duty Forged Ball Mount for 3"…

view full answer...

Answer 4

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Correct Air Lift Air Bags for a 2003 Ford F-250

Product Page this Question was Asked From

Continue Researching