Recommended Ball Mount For A 2021 Subaru Outback Wagon Towing A Yakima Rack And Roll Trailer
Question:
Considering purchase of Yakima rack and roll trailer. Top of receiver on my Subaru is 17 inches from ground, What ball mount and which ball to tow the trailer? Which locks go with that mount? Can I get lock for coupler with same key?
asked by: Alan
Expert Reply:
On the Yakima Rack and Roll Trailer - 66" # Y08106 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits level.
So if you are looking to pick out a ball mount to use with this trailer you'll want to measure from the ground to the top of the hitch opening and whatever the difference between what that dimension is and 20 is the rise/drop you need. Since you know you have a 17" measurement from the ground to the top of the receiver on your Subaru's hitch we'll subtract that from the 20 inch measurement which would leave you with 3" rise needed. For this you could use the Curt Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 8,000lbs - Aluminum # C84WR with a Curt 2" Hitch Ball # 40038.
As for the locks for your ball mount and for the trailer coupler you can use the Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches # 2848DAT which will come with pins/locks for both that keyed the same.
If you do not have a 4-way flat connector on the rear of your Subaru to send your lighting signals to the trailer then I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, either behind the driver's-side trim panel or in the spare tire compartment. You will need to remove some interior paneling to access this harness. Once you've plugged in the connector, insert the provided fuse into the in-line fuse holder.
I've attached some videos that will offer some additional information on these components for you as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Steel
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Bent Pin
- 2-3/4 Inch Span
- Master Lock
more information >
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Curt Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 8,000 lbs - Aluminum
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Aluminum Shank - Silver
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- CURT
more information >
Product Page this Question was Asked From
Yakima Rack and Roll Trailer - 66"
- Kayak Trailer
- Crossbar Style
- 5 Kayaks
- 17 Feet Long
- 250 lbs
- 5-1/2W x 11L Foot
- Aluminum
- Yakima
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: hand brake
- Shop: Curt Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 8,000 lbs - Aluminum
- Shop: Yakima Rack and Roll Trailer - 66"
- Video: Review of Curt Trailer Hitch Ball Mount - Fixed Ball Mount - C84WR
- Q&A: Can Kayak Carrier be Installed on Crossmembers of Yakima Rack and Roll Trailer
- Shop: Kickstand for Yakima Rack and Roll Trailer
- Shop: CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs
- Shop: Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8,000 lbs - Aluminum
- Video: CE Smith Multi Sport Plus Boat Trailer with Bunks Review and Assembly
- Q&A: Kayak Carrier Fit on Crossbars of Yakima Y08106 Rack and Roll Trailer
- Q&A: Rack And Roll Trailer With Thule Square Crossbars
- Q&A: Malone Kayak Trailers Capable Of Carrying 2 Kayaks Each 34" Wide
- Q&A: Will Yakima Rack and Roll Trailer Work Well for Long Trips
- Q&A: Maximum Recommended Towing Speed for the Yakima Rack and Roll Trailer
- Q&A: Are the Tires on the Yakima Rack and Roll Trailer DOT Approved
- Shop: Yakima EasyRider Double Decker Trailer with SkyRise HD Tent - 3 Person - 14-1/2' Long
- Shop: Malone EcoLight Sport Trailer for a Heavy Kayak - 7' Bunks - 400 lbs
- Video: Yakima Rack and Roll Trailer Safety Poll Review
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Shop: Brake Controller
- Search Results: dust cap
- Video: Heavy-Duty Trailer Hitch Installation - 1997 Ford F-350 - B&W
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580