Fit of Timbren TFR350CC Rear Suspension Helper Spring on 2011 Ford F-350 Cab/Chassis Truck

Question

Question:

Can you send me the measurements of the Timbren TFR350CC I want to make sure they will work on my truck? I have a 2011 Ford F350 cab and chassis

asked by: Greg C

0

Expert Reply:

The Timbren # TFR350CC is a fit for a 2011 Ford F-350 Cab/Chassis Truck, as confirmed by Timbren. Measured from the bottom of the rubber Aeon spring to the top of the mounting bracket (see photo), the spring is 7-5/8 inches tall.

You can see a product video by clicking the provided link.

expert reply by: Mike L

0

Dimensions of Timbren TFR350CC Helper Spring
(click to enlarge)

Answer 1

Good news Les, I don't think your diodes are dying in the light. It sounds like there is a wiring issue with the lights because they work with the brake and turn signals like you mention. It sounds like either there is a bad connection with the…

view full answer...

Answer 2

I checked with Timbren and they informed me that the overall height of the #TFR350TTCC that you referenced is 7-1/4 inches including all of the spacers and brackets.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 11

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 12

Here is a list of the bump stop replacements we have which fit your 2024 Ford F-350. If you can tell me how you plan to use your F-350 I can give you my personal recommendation for the option which works best for you. Timbren Front 2WD #TFF350SD2 4WD…

view full answer...

Fit of Timbren TFR350CC Rear Suspension Helper Spring on 2011 Ford F-350 Cab/Chassis Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching