Overall Height of Timbren Kit TFR350TTCC For 2017 Ford F-350 Cab and Chassis

Question

Question:

Hello, Can you tell me what the total vertical height of TFR350TTCC would be including mount, spacers and main section? We have 6.5inch between bottom of frame rail and bump stop so want to make sure these will be long enough. Thank you.

asked by: Winfield

0

Expert Reply:

I checked with Timbren and they informed me that the overall height of the # TFR350TTCC that you referenced is 7-1/4 inches including all of the spacers and brackets.

expert reply by: Jameson C

0

Answer 1

So the overall height is 7-1/4 inches for the Timbrens that fit your 2021 Ford F-350 cab and chassis, which are the Timbren Rear Suspension Enhancement System #TFR350TTCC. They will indeed always be touching your axle, and that's actually what…

view full answer...

Answer 2

I will be more than happy to help you with a suspension enhancement system for your 2020 Ford F-350 but because your truck has a service/utility body the truck will have a narrower 34 inch wide frame and the Firestone Ride-Rite Red Label Extreme Duty…

view full answer...

Answer 3

I can help you with suspension enhancement that will work great on your 2015 Ford F-350 but since your truck has a service/utility body that would normally indicate you have a cab and chassis model truck that has a narrower 34 inch wide frame and for…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Answer 11

It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Overall Height of Timbren Kit TFR350TTCC For 2017 Ford F-350 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching