Could Curt Multi Fit Hitch # 13703 Fit 2021 Winnebago Micro Minnie 2306bhs

Question

Question:

Will this fit 2021 Winnebago Micro Minnie 2306bhs?

asked by: Oleksiy

0

Expert Reply:

We don't have a way to determine that from here since we haven't test fit this # 13703 hitch on your Winnebago Micro Minnie but if you measure the frame of your RV and it's between 22 and 72 inches in overall width this would easily fit.

expert reply by: Jameson C

0

Answer 1

We will have a trailer hitch receiver that is able to be mounted to your 2021 Winnebago Micro Minnie 225RL, but you will need to determine the correct one. From the photos I saw it looks like this trailer does have a bumper and spare tire, so you…

view full answer...

Answer 2

I can help you find a lower gutter mounted roof option for your vehicle. The #INLD is a 5-1/2 inch tall gutter mount and is a lower option than the #INSD which is 7-1/2 inches in height. The good news is the #INLD is a custom fit for your 2011…

view full answer...

Answer 3

Since your GVWR is 7,000 lbs that would indicate most likely your tongue weight is going to be between 600-800 lb which would put you between two weight distribution systems but most likely the #BXW1000 would be your best bet as it has a 700-1,000 lb…

view full answer...

Answer 4

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 9

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

view full answer...

Answer 10

The Torflex Lift Kit #K71-707-02 may be exactly what you need for your Winnebago Micro Minnie 1706FB with tandem torsion axles but we do not have any database of axles and I was unable to find the specific axles on your trailer in my research. This…

view full answer...

Could Curt Multi Fit Hitch # 13703 Fit 2021 Winnebago Micro Minnie 2306bhs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching