Differences in Draw-Tite #75270 and #76025 Hitches for 2011 Honda Odyssey

Question

Question:

Hi, I was wondering what is the difference between this hitch and the Draw-tite 76025. Do they have the same ground clearance or does the 76025 have a higher ground clearance?

asked by: Joe

0

Expert Reply:

There are several differences between the Draw-Tite # 76025 and # 75270 Max-Frame Trailer Hitch Receiver - 2" for your 2011 Honda Odyssey. The # 75270 has a higher maximum gross trailer weight at 4,500 lbs and tongue weight at 675 lbs. This hitch can also be used with weight distribution to increase the trailer weight by 500 lbs, unlike the # 76025 hitch.

The # 76025 has a concealed cross tube, where the # 75270 has a visible cross tube. This allows for better overall clearance on the # 76025 and gives it a nicer look. The receiver tube opening sits higher on the # 76025 which also provides better ground clearance. Trimming of the fascia is required on the # 76025 because of the concealed cross tube.

I recommend the # 76025 for your Honda Odyssey. The clean look from the concealed cross tube and the greater clearance are both great features. It is still a Class III hitch and the max gross trailer weight of 3,500 lbs and tongue weight of 525 lbs will serve you well.

I have attached installation videos as well as pictures of both hitches installed on an Odyssey that you may reference.

expert reply by: Robin H

0

Answer 1

Draw-Tite 2-inch Class III hitch #76025 and the other hitch options shown on the linked page are all confirmed to fit your 2014 Honda Odyssey. I do want to point out that installation of this particular hitch will be more involved than for the…

view full answer...

Answer 2

We have not had the complaints that you mentioned for the Draw-Tite Max-Frame, part #76025. Most of the reviews from our neighbors stated that it's a very sturdy hitch even a year later. Several people have used this for bike racks with great…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #76025 referenced in your question is confirmed to fit your 2017 Honda Odyssey. It features a sleek, hidden crosstube design, but this feature does require more of an in-depth installation when compared…

view full answer...

Answer 4

You really need to use a torque wrench when installing a trailer hitch like the Draw Tite part #76025. We have some you could order with the hitch like with part number #ALL944001 or local auto parts stores will often times let you borrow them as…

view full answer...

Answer 5

I have a solution for you but they don't give us that information. I can tell you that the side to side bolt hole spacing of the etrailer Trailer Hitch item #e98862 is 56.13", center to center. This is the frame width measurement. The bolt…

view full answer...

Answer 6

As you can see by the photo I have edited for you, the Draw-Tite and Curt hitches available for your Odyssey are all pretty similarly designed. When we installed both hitches on a 2013 Odyssey, we found that the Curt #C13068 had about a 1/2 inch…

view full answer...

Answer 7

You will get signifcantly less clearance issues if you go with the EcoHitch Hidden Trailer Hitch item #306-X7372 over the etrailer Hitch item #e98855. I have attached some pictures below that will better show this but the main thing you are getting…

view full answer...

Answer 8

For your 2011 Honda Odyssey the best 2 inch hitch option for ground clearance is the EcoHitch part #306-X7253 which has the hitch opening the closest to the rear bumper but also only the hitch opening hangs below the bumper so there isn't a…

view full answer...

Answer 9

For your 2014 Honda Odyssey, the etrailer #e98862 has a ground clearance of 10.75 inches. The Draw-Tite #75270 has 10 inches clearance. The Draw-Tite #76025 has the best ground clearance at 11 inches.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Differences in Draw-Tite #75270 and #76025 Hitches for 2011 Honda Odyssey

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching