Which 2-1/2 Shank For Curt TruTrack Weight Distribution System C17500
Question:
i want to buy the curt 17500 hitch but i need a 2 1/2 inch shank. thanks
asked by: Ryan D
Expert Reply:
To use the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW # C17500 with a 2-1/2" trailer hitch receiver I recommend the Curt Weight Distribution Shank for 2-1/2" Hitches # C17131.
Now before you purchase the # C17500 I recommend confirming that the total tongue weight of your setup is between 800-1000lbs. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your tow vehicle. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044, but there are other methods which are outlined in the help article I linked.
If you find that your total tongue weight is over 1000lbs I recommend the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW # C17501 which works with total tongue weights between 1000-1500lbs. You will still need the # C17131 to use this system in your 2-1/2" receiver.
I included videos for each of the products mentioned for you to take a look at.
Products Referenced in This Question
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Q&A: Stamp On 2005 Ford F-150 Says 9,900 Lbs but How Much Weight Can I Tow
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle