Specs On Replacement Collars For BlackHawk 2 RM-9200-8 And Collar for Roadmaster Tow Bars RM-9200-6

Question

Question:

checking on specs on roadmaster swivel collars RM-9200-6, 9200-8, need to fit on 1 1/8 diameter shaft, with a 1/2 thru bolt, will either of these work ? also I assume these are for 3/4 crossbar mount. thanks

asked by: Terry C

0

Expert Reply:

The Replacement Collars for BlackHawk 2 # RM-9200-8 are specifically for replacing the swivel collars on your BlackHawk 2 all-terrain tow bar # RM-422.

The Replacement Swivel Collar for Roadmaster Tow Bars # RM-9200-6 is specifically designed to replace your damaged swivel collars on your Falcon All-Terrain tow bar. The # RM-9200-6 can also convert your older model Blackhawk 2 RM-427 from Blue Ox base plate application to Roadmaster base plate application without needing an adapter.

These do in fact use a 1/2" bolt (which is included). The # RM-9200-8 has a diameter of 13/16". I have attached a demonstration video for the # RM-9200-8.

expert reply by: Andrew N

0

Answer 1

To go back to a Roadmaster base plate attachment for your Roadmaster Blackhawk part #RM-422 you'd need the Replacement Collars part #RM-9200-8. If the base plate kit you go with is one that uses a crossbar you'll also need a…

view full answer...

Answer 2

I know you said you cleaned and lubricated the arms of the Roadmaster BlackHawk 2 All Terrain #RM-422, but I think you still need to clean the locking mechanisms which is why you're having an issue. Attached is a page from the instructions…

view full answer...

Answer 3

The Roadmaster BlackHawk part #RM-422 is a 10k tow bar so for a set of safety cables rated for this and are the proper length you'd want the part #RM-653 which is what Roadmaster recommends.

view full answer...

Answer 4

For your Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K #RM-422 the fact that they are bound up obviously shows and issue. My recommendation for you is to completely remove the inner bar and replace it…

view full answer...

Answer 5

The Blackhawk tow bar part #RM-422 and the Sterling part #RM-576 are both really great options but they have some distinct differences. One being the Blackhawk has a 10k capacity and the Sterling 8k. Both are well above what you'd need so…

view full answer...

Answer 6

I consulted an online copy of the 2013 Jeep Wrangler Unlimited Owner's Manual, and found that the information regarding flat towing procedures begins on page number 532. The procedures outlined make no mention of what position the key needs to be…

view full answer...

Answer 7

We have the Complete Repair Kit for Roadmaster Sterling Tow Bar under part number, #RM-910003-30. The Falcon 2 Repair Kit is #RM-910003-60 and the Replacement Swivel is #RM-9200-6. When cleaning do not use any harsh abrasive chemicals or instrument…

view full answer...

Answer 8

Thank you for your photo Jim. It does look like the inner arms of your Falcon 5250 got bent somehow. I contacted Roadmaster and there are not replacement inner arms available for the Falcon 5250 anymore or a repair kit because it's an older bar.…

view full answer...

Answer 9

There are a number of replacement parts available for your Falcon All Terrain Tow Bar #RM-522. Without knowing the specific parts you are seeking, I'll list what we have available for you to take a look at. - Replacement Inner Arm #910021-65 -…

view full answer...

Answer 10

You are correct with the part you will need in order to convert your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates #RM-677 for use with your Roadmaster direct connect base plates, which are two of the swivel ears: -…

view full answer...

Answer 11

I spoke with my contact at Roadmaster and I have the following measurements for the Roadmaster MS Base Plate Kit - Fixed Arms Item #1437-3. The rectangular plate is 6-11/16 inches long by 4 inches tall overall. The mounting holes are spaced 5-3/16…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Specs On Replacement Collars For BlackHawk 2 RM-9200-8 And Collar for Roadmaster Tow Bars RM-9200-6

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching