Parts Needed To Flat-Tow a 2021 Ford Ranger

Question

Question:

So whats your thought on a towbar-Hitch adapter and brake system for a new ranger? Thanks

asked by: Dave D

1

Helpful Expert Reply:

In order to flat-tow a 2021 Ford Ranger you'll need base plates, safety cables, tow bar, wiring harness, and supplemental braking system. I have attached my recommendations for these parts below.

Roadmaster Direct-Connect Base Plate Kit part # RM-524459-5
Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 (Safety Cables Included)
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267
Roadmaster Brake-Lite Relay Kit for Towed Vehicles part # RM-88400
Demco Stay-IN-Play DUO Supplemental Braking System part # DM86VR.

expert reply by: Conner L

1

Answer 1

For your 2023 Ford Ranger Tremor you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-524459-5 Tow Bar: etrailer SD Non-Binding Tow Bar #e74ZR. This tow bar comes with safety cables included and has…

view full answer...

Answer 2

For your 2023 Ford Ranger XLT we have the Blue Ox base plate kit part #BLU77XR as a confirmed fit. The Blue Ox base plates are really easy to connect and disconnect from tow bars so they are a great choice. In addition to the base plates, you will…

view full answer...

Answer 3

I have a solution for you, but Curt does not make a base plate for the 2021 Ford Ranger. However, your Curt Rambler Tow Bar #C26FR is compatible with Blue Ox base plates so you can use the #BLU77XR on your Ranger and they will be compatible. This…

view full answer...

Answer 4

Yes, the Blue Ox Base Plate Kit for a 2021 Ford Ranger is part number BX2689 and this is listed on the etrailer site under, #BLU77XR. It is a confirmed fit for all models/trim levels of the 2021 Ford Ranger and includes models with ACC - Adaptive…

view full answer...

Answer 5

For a complete flat towing setup on your 2020 Ford Ranger you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend using:…

view full answer...

Answer 6

While you can flat tow a 2019 Ford Ranger, like you mentioned, tow hooks are for emergency towing only and do not have the necessary strength to flat tow this truck, so you will need base plates. The good news is we offer every part you need to flat…

view full answer...

Answer 7

The Brake Buddy #HM39524 "Select 3" instructions (available at their website) say to not use the 12-volt accessory outlet (the old cigarette lighter outlet) but to rather use the included wiring harness (with included in-line 15 amp fuse)…

view full answer...

Answer 8

The Blue Ox base plate kit part #BLU77XR that you referenced is a confirmed fit for your 2021 Ford Ranger and is what provides the connection point for a tow bar to attach to. I believe the connector for the front of the truck that you mentioned is a…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

Yes, I checked with Blue Ox and the #BLU77XR that you referenced does fit the Tremor model of the 2021 Ford Ranger that has the skid plate.

view full answer...

Answer 11

The correct replacement surge module for the Portable Power Watchdog Surge Protector part #HU67FR is the Replacement Surge Module for Power Watchdog Surge Protector part #HU98FR. The price is shown on the product page.

view full answer...

Answer 12

In order to use a Blue Ox Tow Bar like the Blue Ox Alpha 2 Non-Binding Tow Bar part #BX7380 on a 2021 Ford Ranger you'll need the Blue Ox Base Plate Kit part #BLU77XR. In addition to these, you'll also need a wiring harness and the Roadmaster…

view full answer...