etrailer Class III Trailer Hitch Installation - 2020 Ford Ranger Video

Yes, the etrailer Trailer Hitch Receiver #e63ZR will fit your 2021 Ford Ranger Tremor. I have included an image sent in with a review showing the Curt #C13417 which is identical in construction to ours with the larger spare tire used on the Tremor.…

I'd be happy to help with that. I'd recommend the Curt Class III hitch that you'd looked at, part #C13397. Curt and Honda both state that there isn't a hitch fit for the 2021 CR-V Hybrid model, but if you look at the…

Yes, we have confirmed that the Curt Trailer Hitch Receiver #C12169 will fit your 2023 Honda CR-V Touring Hybrid. This is a Class II hitch with a 1-1/4" receiver. If you would rather have the additional tongue weight capacity, and be able to…

You are correct that the etrailer Trailer Hitch Receiver #e63ZR and the Curt Trailer Hitch Receiver #C13417 for your 2021 Ford Ranger are almost identical. Both of these hitches are made in the USA, have a bolt-on, no-drill installation and have the…

Yes, the etrailer hitch part #e63ZR that fits your 2020 Ford Ranger does allow you to store a full sized spare underneath it. I attached a picture that shows this for you to check out.

The Curt Trailer Hitch #C13417 and the etrailer Trailer Hitch #e63ZR are both confirmed fits for your 2021 Ford Ranger and work well for you. The only significant difference is the finishes on the two hitches. The Curt hitch #C13417 has the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer Trailer Hitch Receiver #e63ZR is a fit for your 2022 Ford Ranger. This isa great choice for a hitch. Check out the attached review/installation video.

Yes, the Blue Ox base plates are a fit for the 2023 Ford Ranger Tremor model, same as the non-Tremor model. I'll go ahead and list the correct part number below, as well as the rest of the parts needed to flat tow the '23 Ranger: - Base Plate…

Though there is not a separate lock available for the latch pin handle of the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1108 that fits your 2002 Ford F-250, it would not be able to be removed by a teen or young kid. If you take a…

The angle of the nose of your trailer will definitely help with turning clearance. Especially since the coupler of the trailer is at the very front. It's hard to say just based on that if you'd have turning clearance for super tight turns but…

I have a great hitch for you but I checked with our vendors and no one makes a hitch that attaches to the bumper on the 2022 Ford Ranger with or without the Tremor Package. I took a look at Ford's website and they do not list one either just an…