Recommended Timbren Axle-Less System And Electric Trailer Brakes For M416 Trailer
Question:
Hello, I am rebuilding a M416 trailer to pull behind my Jeep. Would like to go with the timbren with electric brakes. My Jeep is a 2000 TJ. What parts do I need for this?
asked by: Brent H
Expert Reply:
I would be happy to recommend the correct Timbren axle-less system and electric trailer brake setup for the M416 trailer you are rebuilding.
Starting with the Timbren system I recommend the 2000lb system # ASR2KHDS02 which will be plenty highly rated for your trailer and cargo, and is designed for wide tires like what you'd typically find on a M416 trailer like yours.
Since the wheels that are used on the M416 trailer have a 5 on 5.5 bolt pattern, I recommend two of the Trailer Hub and Drum Assembly # AKHD-555-35-EZ-K which will work with Timbren kit mentioned, and includes # L68149 inner bearing, # L44649 outer bearing, races, grease seal, grease cap, and lug nuts.
For brake assemblies I recommend the Electric Trailer Brake Kit # AKEBRK-35-SA with mounting hardware # BRKH10B.
To take care of the wiring I recommend the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector # HS381-9000 which will install to the tongue of the trailer and give you a junction box to make all of the wiring connections. You will need # 10-1-1 to go from the junction box to one wire on each brake assembly using # DW05745-10 for a weather tight connection, and you will ground the other wire on the brake assemblies to the frame of the trailer.
Your 2000 Jeep TJ will need to also have a 7-way connector installed. If you do not have a 7-way connector already installed you will first need a 4-way connector which I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118409 since it will plug into your factory harness.
With a 4-way connector installed you can then install the # ETBC7 which will include all of the components required for adding a 7-way connector, and will allow you to install a trailer brake controller to control your new trailer brakes like the Tekonsha Prodigy P3 # 90195.
I included videos for all of the products mentioned for you to take a look at.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: timbren
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Search Results: timbren axle less
- Search Results: spindle wear sleeves
- Search Results: 84557uc3~ez
- Search Results: akhd~555~35~k
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,200 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Q&A: Deflection of Timbren Axle-Less Trailer Suspension for Off-Road Tires ASR1THDS03
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Shop: Brake Controller
- Shop: Trailer Wiring
- Search Results: m416
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Roof Rack
- Search Results: kuat grip
- Video: Kuat Grip Ski and Snowboard Carriers T-Channel Mount Kit Review
- Video: Thule WingBar Evo Crossbars Review
- Video: Review of Kuat - Ski and Snowboard Racks - GRDMK
- Video: Thule Roof Rack XADAPT2 Review
- Video: Kuat Grip Slide Out Ski and Snowboard Carrier Review
- Video: Kuat TRIO Roof Bike Racks Review - 2016 Subaru Outback Wagon
- Shop: Air Filter
- Q&A: How To Use 2018 Jeep Wrangler Wheels On a M416 Military Trailer
- Q&A: Converting Pintle Setup of M416 Stevens Military Trailer to Lock N Roll Articulating Coupler
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Q&A: Timbren Axle-Less Suspension Recommendation for M1101 Trailer