Does Bumper Fascia Need Trimming To Install Curt C13269 Class III Hitch On 2015 Jeep Renegade

Question

Question:

Do you have to cut the bumper cover to allow clearance for the hitch? Pictures posted seem to indicate that however the instructions do not mention it.

asked by: Ryan V

0

Expert Reply:

As you can see in the provided photo, the hitch sits far enough below the bumper that no trimming is required.

If you'll be using the hitch for towing a trailer, you'll need a few other parts. For a trailer wiring harness, use part # 118651. For a ballmount, use # D-28 and # 19260 for a 1-7/8 inch trailer ball or # 63845 for a 2 inch.

I've linked to the install video showing the Curt # C13269 hitch being installed on a 2015 Renegade, and also to a video for the trailer wiring harness. I've also linked to the installation instructions.

expert reply by: Mike L

0

click to enlarge

Answer 1

I recommend the Curt Trailer Hitch Receiver #C13269 for your 2020 Jeep Renegade. The 2" receiver has more ball mounts and accessories available for it making it a better and stronger receiver. The maximum tongue weight capacity is 525lbs and…

view full answer...

Answer 2

The amount of clearance you have between the ground and mobility scooter carrier will be largely dependent on the carrier you choose, I recommend one with a built-in rise if avavailbe. The height of the trailer hitch isn't adjustable and will be…

view full answer...

Answer 3

EcoHitch won't allow us to link the installation instructions in our product descriptions, but I can certainly send you a .pdf copy in a separate email. The installation of the EcoHitch #EH83VR isn't too involved, but will require that a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...