Replacement Tarp Cover for Extang Express Soft Tonneau on 2006 Chevy Silverado Short Bed

Question

Question:

Will this fit a 2006 Chevrolet Silverado LT Extended cap with a short bed?

asked by: Sean T

0

Expert Reply:

The Replacement Tarp for Extang Express Soft Tonneau Cover # EX49450 will not fit a 2006 Chevy Silverado short bed. You will have the Extang Express Soft Tonneau Cover - Velcro - Roll Up - Vinyl EX50940 which will use the Replacement Tarp for Extang Express Roll-Up Soft Tonneau Cover - Black # EX49940.

expert reply by: Jason S

0

Answer 1

For a 2010 Chevrolet Silverado with the 6-1/5 bed, with an Extang Express tonneau cover #59650, the replacement tarp is part #EX49650. This cover uses Velcro that will attach to the bed at a 45-degree angle. This cover is not the replacement cover…

view full answer...

Answer 2

The correct replacement cover for the Extang Express Soft Tonneau Cover part #EX50940 on your 2003 Chevrolet Silverado 1500/2500 with the 6-1/2' bed is the Replacement Tarp for Extang Express Roll-Up Soft Tonneau Cover part #EX49940.

view full answer...

Answer 3

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 4

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Replacement Tarp Cover for Extang Express Soft Tonneau on 2006 Chevy Silverado Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching