Replacement Hub and Rotor for 3,500 lb Axle of Trailstar Trailer
Question:
Hi, I have a 2004 Trailstar boat trailer and Im needing a new hub assembly with 9.25 disk brake rotor, non-vented, bearing kit and brake pads. Its a 5 on 4.5. I have attached several pics, including the trailer sticker with all the info about the model, etc. I have called Trailstar, Tracker, Bass Pro and a local shop but no one was able to provide me with any information on what replacement parts will fit my trailer. If you could please help, it would be much appreaciated. Thanks,
asked by: Josh L
Expert Reply:
I am sure we can help replace all of the brake components but without a brand I can't really help pin point just the hub/rotor. Instead the best we could do is a kit that replaces the hub rotors, the mounting bracket, and the calipers.
So you could use the part # K2HR35D and have a replacement for both sides of your axle and you'd be set. This has the correct capacity of 3,500 lb and bolt pattern of 5 on 4-1/2 inch.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub
- Standard
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Gooseneck Hitch
- Search Results: continuous hinge
- Video: Review of Demco Trailer Brakes - Hydraulic Drum Brakes - 18788-87
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Video: Kodiak Trailer Brakes KCMB12D Review
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: akhd~545~35~g~ez~k
- Q&A: What is the Proper Way to Tighten the Nut on Your Axle
- Search Results: ts20037b
- Search Results: leaf springs
- Search Results: gnrk1123
- Search Results: 8~214~8
- Search Results: 1123
- Q&A: How to Determine Correct Timbren Axle-Less Suspension for Boat Trailer
- Q&A: Replacement Axle for Old Dexter Axle with Electric Brakes
- Q&A: What Height is Recommended When Setting the Fender Height Above the Trailer Tire?
- Q&A: Recommended Axle To Replace V Bend Boat Trailer Axle With 90-1/2" Hub Face Measurement
- Q&A: Caliper Installation Position Recommendation when Installing Disc Brakes on Trailer
- Shop: Trailer Wiring
- Video: Demco Trailer Brakes - Hydraulic Drum Brakes - 40716-15 Review
- Video: etrailer Left and Right Hand Hydraulic Brake Kit Installation
- Video: etrailer Hydraulic Trailer Brake Kit Installation