What do you Recommend for a Class 3 Cushioned Ball Mount Rated for 7,500 lbs. Without a Rise
Question:
Hi I am looking for a 2x2 ball mount, preferably shock absorbing, with 0 rise that can support a boat and trailer at 7,500lbs. I saw the post asking for this but the recommendation was for a 6k lbs ball mount. Any advice? Thanks
asked by: Chris B
Expert Reply:
I have two really good options for you that offer a zero rise. The Draw-Tite 2-Ball Mount for 2" Hitches part # 80796 has both a 2" and a 2 5/16" ball and is rated for up to 16.000 lbs. It does not have the cushioned feature you asked about but gets the job done.
For the shock absorption you want the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers part # 325-GH-1024 this also has the 2 and 2 5/16" balls and is perfectly suited for your trailer and tongue weight assuming it is 10-15% of your trailers weight. This use a TorsionFlex System to eliminate the transfer of energy from the trailer to the truck and is really nice to have. Check out the video I made on them that I have linked for you.
Dont forget to keep it secure or locked. The InfiniteRule Lock Set for Gen-Y Ball Mounts part # 34061650-D is an excellent way to do that.
Products Referenced in This Question
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Stacked Receivers
- Shock Absorbing
- Gen-Y Hitch
more information >
InfiniteRule Lock Set for Gen-Y 10K and 16K Ball Mounts for 2" Hitches - Qty 3
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Locks
- Locking Pin
- InfiniteRule
more information >
Draw-Tite 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 16K - Black
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 0 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: Air Filter
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: air intake filter
- Search Results: cabin air filter
- Shop: Curt Solid 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 10K - Black
- Shop: Curt Solid 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 10K - Chrome
- Q&A: How to Get a Ball Mount with 0 inches of Rise or Drop
- Q&A: Recommended Torque for Tightening Curt Hitch Balls to Ball Mount
- Q&A: How to Match Different Heights of Hitch Ball and Trailer Coupler for Safe Level Towing
- Q&A: What Tool is Normally Used for Torqueing Down Hitch Balls
- Video: Erickson Ratchet Tie-Down Strap Review EM69627
- Video: Erickson Ratchet Straps - Standard Strap - EM34410 Review
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Shop: etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome
- Shop: Fastway Trailer Hitch Receiver Lock - 2" Hitches - 5/8" Diameter - Qty 1
- Shop: Responsive Ratchet Self-Tensioning Tie-Down Straps - 1-1/2" x 8' - 1,000 lbs - Qty 2
- Shop: Erickson Ratchet Tie-Down Strap w/ Strap Wrapper and Double J-Hooks - 2" x 27' - 3,300 lbs
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2018 Lexus RX 350
- Video: Best 2019 Lexus RX 350 Trailer Hitch Options
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Video: Curt LED 4-Way Flat Connector Vehicle End Tester Review
- Video: Gen-Y Hitch Receiver 3-Ball Mount Review
- Q&A: Does Ball Mount Have To Place Trailer Ball Exactly Level
- Q&A: Trailer Hitch Recommendation for a 2004 Lexus RX330
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Grease Seal Recommendation For 6,000 Lb Axle With Dexter Hub Assembly