Trailer Hitch Recommendation for a 2009 Scion xB
Question:
What hitch size do you recommend for the XB? I was going to get the class 2 but I did not know if that was overkill for the capacity of the XB? What is the towing capacity?
asked by: Chris S
Expert Reply:
When there is an option always go for the highest Class hitch for any given vehicle. A higher class hitch will allow you more options for accessories like bike racks and cargo carriers in addition to greater towing capacity. For a 2009 Scion xB we have Class II trailer hitch # 12490. The towing capacity of the hitch is 350 pounds tongue weight and 3,500 pounds gross trailer weight. I have included a link to the instructions and a video for you.
The towing capacity of a vehicle can change depending on how it is equipped. The owners manual should have all of the towing information. I did some research and found that a lot of people tow with the xB but they also mention that Scion says not to. You will need to consult the owners manual and/or a Scion dealer to determine if you can tow. If you can tow with the xB and the capacity is lower than the hitch you have to go by the lower rating.
For trailer wiring use # 118468. The hitch comes with a ball mount, pin and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Draw-Tite Sportframe Trailer Hitch Installation - 2009 Scion xB
- Video: Draw-Tite Drawbar Review 3593
- Video: Curt Ball Mounts - Fixed Ball Mount - C45521 Review
- Shop: Windshield Covers
- Shop: Trailer Wiring
- Shop: Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Shop: Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: Adding Brakes to a Mobile Home Axle
- Article: Trailer Wiring Diagrams
- Search Results: dust cap
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Q&A: Trailer Grease Seal to Replace 127194TB
- Search Results: 25580
- Shop: Base Plate for Tow Bar
- Article: How to Measure for Trailer Hitch Drop