Does the Wall Thermostat Receive Power from the Furrion Chill RV Zone Controller?

Question

Question:

Dies the power come from the control box to the thermostat

asked by: William

0

Expert Reply:

The power for the thermostat and the temperature sensor will come from the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup # FACC12SA-BL The Replacement Premium Wall Thermostat for Furrion Chill RV Air Conditioner - Single Zone - Black # FR33PR will have the controller wires just like a typical home thermostat to receive and send information to the air conditioner unit.

expert reply by: Jason S

0

Answer 1

The Replacement Premium Wall Thermostat for Furrion Chill HE RV Air Conditioner #FR33PR isn't going to be compatible with your Coleman AC system. You would need to either switch out the system entirely with Furrion equipment or get a new…

view full answer...

Answer 2

On a Furrion Chill Premium RV Air Conditioner System #FR55PV the rooftop unit and zone controller #FACC12SA-BL both run off of 115v AC current. The thermostat #FR33PRruns off of 12v DC current. The zone controller has multiple bundles of wires with…

view full answer...

Answer 3

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...

Answer 4

The Furrion Single Zone Controller part #FACC12SA-BL does have a dip switch setup underneath the cover of it.

view full answer...

Answer 5

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

view full answer...

Answer 6

If you're trying to add a wall mounted thermostat to your Furrion Chill RV Air Conditioner and Air Distribution Box w/ Built-in Thermostat - 13,500 Btu #FR52PR then you will need the Replacement Single Zone Controller for Furrion Chill RV Air…

view full answer...

Answer 7

I reached out to Furrion who said that for the Single Zone Controller #FACC12SA-BL, dip switch number 2 should be the only one on.

view full answer...

Answer 8

When installing the #FACC12SA-BL the two brown wires do not have a pre-determined positive/negative so you can connect either one to either of the furnace wires and it will function properly. If you're going to run the furnace you will need to…

view full answer...

Answer 9

It sounds like you are using a circuit tester like #PTW2993 on your Furrion AC/DC Distribution Panel - Wall Mount #FDP12WABL which is good on the 12v DC side. It shows that you are getting power to that circuit at that location which leads me to…

view full answer...

Answer 10

That is a great question! I reached out to my contact at Furrion and the wires of the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup #FACC12SA-BL have a few different bundles. The first bundle has 6 wires in it and is…

view full answer...

Answer 11

I attached a picture I got from Furrion that shows a wiring diagram for the #FACC12SA-BL as well as an install video for you to check out.

view full answer...

Answer 12

I sent your message to Furrion to try and get their insight and they told me that "The 12v is the power/ground and the 115v is connection. The 12v power is wired to the thermostat."

view full answer...

Does the Wall Thermostat Receive Power from the Furrion Chill RV Zone Controller?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching