Recommended Trailer Hitch for 2011 Keystone Passport 245RB
Question:
Thank you. I measured between the I-Beams and it comes to 68.5. Will that same part still work or I need to change to the 13703?
asked by: Dustin K
Expert Reply:
As long as your 2011 Keystone Passport 245RB has a box frame, C-channel frame, or I-beam frame that the frame members are no more than 66" apart, you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704. This hitch can be bolted on to the frame with the included hardware and will provide you with a 2" receiver that will allow you to tow a trailer with.
To install a wiring harness to power the trailer lights on your Keystone Passport you can use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044, which will connect to the tail light and turn signal circuits on your trailer and provide you with a 4 way harness for towing a trailer.
For a ball mount you can use the Curt # C45030, which uses a hitch ball with a 1" shank diameter. For a 2" trailer coupler you can use something like the # 63845 or for a 1-7/8" you can use the # 19260. I've also linked our entire selection of hitch balls with 1" shanks in case you need something different.
As I mentioned, I linked some parts, as well as some review videos of these parts for you to have a look at and search through that I do recommend checking out.
Products Referenced in This Question
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 66 Inch Wide Frame
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Bolt-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Rear Receiver Hitch For My 5th Wheel Toyhauler To Double Tow
- Q&A: Mounting Bracket Dimensions of Curt RV Hitch 13704
- Q&A: How Far Does Curt Trailer Hitch C13704 Hang Down from the Vehicle Frame
- Article: Trailer Wiring Diagrams
- Q&A: Do Holes Need To Be Drilled Into The Adjustable Arms Of The Stromberg Carlson Adjustable Hitch
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Trailer Maintenance Schedule
Dustin
5/21/2020
Thank you. I measured between the I-Beams and it comes to 68.5. Will that same part still work or I need to change to the 13703?