How To Carry 1-1/4 Receiver Accessory with Dual Hitch Adapter
Question:
I would like to know if your website has a Specific hitch receiver product. I am looking for a ball mount hitch 2in receiver with an attached 1.25 accessory hitch
asked by: Daniel J
Expert Reply:
I have a solution for you, but to my knowledge there is not such a product available. There are dual receiver adapters that have the same size receivers on both ends, but I can't say that I've ever seen one with both a 1-1/4" and 2" receiver slot.
Instead, you could use something like the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 and pair it with the Brophy Hitch Reducer # HT02 to carry a 1-1/4" accessory on the top. You will have a 750-lbs total tongue weight capacity with the trailer and accessory, so it may not be the best solution if you're towing a heavier trailer.
If you're towing something heavy, I recommend using the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10K # 325-GH-313 with the Brophy HT02 mentioned above. This is a great solution because of the multiple stacked receivers that will allow you to easily carry a bike rack and tow at the same time.
The best solution for this would be to either find out if your bike rack with a 1-1/4" receiver shank has a sleeve adapter available, or get a bike rack that is compatible with 2" receivers. If you can let me know what bike rack you've got, I'm happy to see if there is an available sleeve adapter- or just let me know how many bikes or the type of accessory with 1-1/4" shank you're trying to carry and I can work to find a suitable alternative.
Products Referenced in This Question
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Stacked Receivers
- Gen-Y Hitch
more information >
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Built-In Dual Hitch
- CURT
more information >
Product Page this Question was Asked From
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Continue Researching
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Damaged Caused to Travel Trailer Brake Drums and Bearings by High Temperatures
- Article: How Long Can You Boondock in an RV?
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Q&A: Blown Trailer Fuses Or Relays On 2014 Ford F-250 Diesel
- Q&A: Vent Cover Recommendation for Ventline Roof Part # VD0433
- Q&A: Vent Screen and Screen Base to Replace Part Numbers VD0433 and VD0434 on 2011 Grey Wolf 26RL
- Q&A: Replacement Screen for Ventline Ventadome VD0433 Trailer Roof Vent
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Trailer Tire Sizing
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Stability Control for Heavy Duty Vehicles
- Article: Trailer Hitch Receiver Sizes