How to Mount 7-Way Connector to Hidden Curt Hitch C13309 on 2019 Nissan Pathfinder
Question:
Hi. I'm looking at the Curt Trailer Hitch C13309 for my 2019 Pathfinder. I like the way the crosstube is hidden behind the bumper, however I'm wondering how I would mount a 7-Way. Had attached a bracket to the hitch in the past but I suppose that's not really an option with this kind of design. Suggestions? Thanks!
asked by: Angelo
Expert Reply:
With the Curt Trailer Hitch Receiver # C13309 installed on your 2019 Nissan Pathfinder, which as you mentioned features a hidden crosstube that stays tucked behind the rear bumper, you will just need to mount the 7-Way bracket directly to the bumper fascia using something like the Pollak # PK12711U.
If you'd rather not bolt anything directly into the fascia, another good option is with the Curt Easy Mount Bracket # C58000. This will attach directly to the hitch receiver on the Curt Trailer Hitch and provide you with a great mounting point for a 7-Way and 4-Way connector. I have attached a short video review below so you can see exactly how it works.
Products Referenced in This Question
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 6 Round
- 7 Round
- CURT
more information >
Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- Pollak
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Video: Curt Trailer Hitch Installation - 2020 Nissan Pathfinder
- Video: Pollak 7-Pole RV-Style Trailer Connector Review
- Shop: Roof Rack
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Shop: No-Drill Mount for Electrical Mounting Bracket - Short
- Shop: Curt Roof Rack for Raised Side Rails - Aluminum - Black - 53-3/8" Long
- Shop: Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Shop: Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Q&A: 7-Way Trailer Connector and Brake Controller Install on 2020 Nissan Pathfinder
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98908 on a 2019 Nissan Pathfinder?
- Q&A: 7-Way and Brake Controller Recommendation for 2018 Nissan Pathfinder
- Q&A: What Is Included In the Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket
- Q&A: Will the Draw-Tite Mounting Bracket Work with Factory 7-Way Connector on Vehicle
- Q&A: Bracket for Mounting 7-Way Install on 2019 Nissan Pathfinder with Curt Hitch
- Q&A: Recommended Trailer Hitch and Wiring Harness for 2017 Nissan Pathfinder
- Search Results: dust cap
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: 25580
on Trailer Hitch
