Tow Mirror Recommendation for 2019 Chevy Express Van

Question

Question:

Do you have extendable towing mirrors available for a 2019 Chevy Express cargo van?

asked by: Patty P

0

Expert Reply:

For your 2019 Chevy Express Van we have custom fit slip-on style tow mirrors that fit with the part # LVT-1700 but we do not have any full replacement style mirrors. The # LVT-1700 is a really great option that is easy to install, provides great visibility and is overall your best option.

I attached an install video for this kit on a similar 2017 Chevy Express Van as yours for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 2020 Chevy Express Van the slip-on tow mirrors I recommend are the Longview part #LVT-1700. These are custom fit for the mirror housings of your van which means they'll install very easily and be very secure. They also greatly improve…

view full answer...

Answer 2

You will just need to measure in between your wheels on your Coachmen Freedom Express 238BHS to verify what you need exactly, however we do have the Stromberg Carlson Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs #SC47MR. This wheel chock…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 10

To determine which brake assemblies would be needed, you will need to measure your existing brake drums as shown in the provided photo. Since your trailer has a 14,000 lb capacity, you most likely have tandem 7,000 lb axles, which typically use a…

view full answer...

Answer 11

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 12

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...